Unknown Booting Problem on Jasper

[visage]

TX Product(s) used: J-R Programmer V2 , CoolRunner Rev.C
Console Type: Jasper
NAND size: 512 is what the nand reader detects it
Dashboard version: 16767
CB version: 6723 (nand reader says so)
Screenshot of NAND details from J-Runner:
J-Runner log:
updflash.bin log (if applicable):
Image of Coolrunner:
Images of close-up soldering to motherboard:
(attach images to your post)

Description of problem:The console Wont boot at start-up the coolrunner also no green light, I want to mention that before I RGH it I was doing the Jtag on it but at start up I got error code e0022 (E10) , so I decided to try RGH it now I don't get the redlights but it wont boot. Please excuse my bad soldering this is the first time in my life tryng to solder something. Also I think that the Coolrunner and JRP are replicas although I bought them on the official site that u guys recommended. Please Help me out on this if you can thanks.

Was the console working before you started: Yes it worked It was Flashed on the DVD

 

[scott1503]

the soldering needs some work the solder joint look far to large, a couple of the connection seem to be bridge with to much solder applied to points.
my suggestion would be get a junk board or a DIY solder style kit to practice you soldering before continuing with the install.

 

[visage]

What do you mean by "bridge" I ask because I'm copletly noob at this and dont understand these terms

 

[GeekHeat]

U are doing rgh1 install when its rgh2. So it will never glitch. Google rgh1.2 install.

 

[scott1503]

What do you mean by "bridge" I ask because I'm copletly noob at this and dont understand these terms

by bridge I mean 2 connection meeting with a structure in this case 2 solder point look to be joined by a solder joint. the solder points need a lot of solder removing. are you using flux and a clean soldering iron ?

 

[visage]

by bridge I mean 2 connection meeting with a structure in this case 2 solder point look to be joined by a solder joint. the solder points need a lot of solder removing. are you using flux and a clean soldering iron ?

Yeah I have solder whater and a solder sucker the iron I dont think its High quality because I only bought it for aroun 12 bucks

 

[visage]

U are doing rgh1 install when its rgh2. So it will never glitch. Google rgh1.2 install.

WoW thanks I will desolder and solder back in the right places..brb

 

[visage]

So I did the soldering and the CR starts programing the Chip but doesent seem to get it to boot so I come and program the CL with another xfv file and now the green led from the CL just remains green all the time doesent flash anymore...hmmm is that a problem?

 

[visage]

My Console just doesen't want to boot the green optical led just keeps flashing...any advice?

 

[GeekHeat]

My Console just doesen't want to boot the green optical led just keeps flashing...any advice?

u need to google rgh1.2 install.

 

[visage]

u need to google rgh1.2 install.

I did and I looked up and did what it says there and still no boot I even watched a video on Youtube about RGH 1.2 I tryed to program the CR with jasper_dyn2.xsvf it says unsuportedfile

 

[scott1503]

plus its a fake coolrunner

 

[john mathews]

plus its a fake coolrunner

bingo and they still insist on helping:facepalm:

 

[visage]

How should I know its fake I bought it from ebay the pic was authentic

 

[Titanfreak736]

lol the pic was authentic wtf does that mean, if you have a clone go over to team x360.co.uk but you will probably never get it to work with that soldering

 

[scott1503]

How should I know its fake I bought it from ebay the pic was authentic

99% of eBay cool runners are non genuine.

 

[visage]

Did you red my description ? befor I was tryng to do RGH I did jtag and I got error e0022 with 3 red lights and I think I might need to reflow the GPU or Hana chip wich I was hoping not to. SO I tryed to reflash my original nand back using Jtag tool but I get an error in it I cant write the nand...and also cant boot into xell.. I'm hoping that I havent screwed my console ....thats why I'm asking for help

 

[Oggy]

I'm afraid we can't help with complete rip offs of the Xecuter brand