Unleash X and X3 Bios not working well together

[sncboom2k]

Ok so it's probably me - but I installed the X3 bios (latest version) and it works like a champ. When I say "boot to dash" - it hoses up my unleash-x. All of the settings are gone including the F drive. My skin is gone and all. I mean they are on the hdd in the same folder as unleash-x - but it won't load them. I set the order for Unleash-X 1st and Evo-X second. No dice - goes to Unleash-X stripped down to nothing. Evo-X works fine.

Any thoughst people?
Thanks
Sncboom2k

 

[gamersha794]

this is a known problem having to do with unleash-x and not handling fonts correctly

 

[Telexen]

unleashx has fixed it ... but is gearing up for a new release rather than putting out a quick fix for the problem. Expect a new version of UnleashX soon that will have no issues with the X3

 

[Linkitch]

Bad Status After LiteOn Erased !! Drive Not Found In Windows

Ok so I followed all the steps./ Ive saved all of my FW Keys, After Lite on was erased I turned it off then on / and kept returning a bad Status. ...And now, it wont connect to Jungleflasher any more... Did i brick my 360 ?

EDIT:

Ok so Im not sure what happened really but I dont want to do another step until I get assistance. Ive click Intro/ Device ID to send vender Info and the drive is picked up again, not sure what to do Is the drive completely erased now since no Info shows up unless I send the vender ?

Sending Vendor Intro to port 0xE800

Serial flash found with Status 0x72

Sending Device ID request to port 0xE800
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes2

also the tray doesent eject, Im thinking the drive is erased and I Should just go ahead and proceed with Writing the LT firmware. Need some guidance from you experienced ppl

 

[ReMix]

Re: Bad Status After LiteOn Erased !! Drive Not Found In Win

that is what is supposed to happen

you have no firmware on the drive and it is detected

press write from this status

 

[Linkitch]

Re: Bad Status After LiteOn Erased !! Drive Not Found In Win

^^Im Getting the wrong status now after resending the command

Getting Status from port 0xE800
Invalid Status 0x80

 

[anekin007]

Re: Bad Status After LiteOn Erased !! Drive Not Found In Win

click intro/device id using the same port to see if it shows up.

 

[Linkitch]

Re: Bad Status After LiteOn Erased !! Drive Not Found In Win

I got it, Problem was i wasn't cycling the 360 off/on fast enough to get the right status.