LITEON DG-16D4S - SLIM Unlocked Winbond PCB - no lock status?

J

j2dac

Full Member
May 12, 2010
42
0
Hey,

I just bought an unlocked winbond pcb (kamakaze) and installed it into the drive casing. I opened it up in jungleflasher and intro'd it but nothing is coming up in the lock status on the bottom right of the program. I tried outro'ing it a few times but did not work. Can anyone tell me how to write to it?

More info: the eject and reading are working fine as far as I can tell. I think im just missing a step before writing.

Thanks in advance for your help.
 
J

j2dac

Full Member
May 12, 2010
42
0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Apr 03 18:34:16 2012

This is a 32 bit process running on 4 x 32 bit CPUs
X360USB PRO detected, Version 0.18

portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 3 I/O Ports.
Found 0 Com Ports.
Found 4 windows drives C: D: E: F:
Found 1 CD/DVD drives D:

Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x01
Manufacturer ID: 0x1
Device ID: 0x1
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !
Click to expand...
There it is, thanks.
 
J

j2dac

Full Member
May 12, 2010
42
0
It showed up once with 0x00 and I tried to write but it didn't work. Hasn't come up since though. Next time that happens (assuming it will happen again) will I click the status button ? And are you sure it's a bogey pcb? I got it off a very reputable member of these forums. Thanks again for your help.
 
Last edited:
B

bandit123

VIP Member
Jul 4, 2010
1,517
68
(UK)
r u putting alcohol swap on the hole when its trying to unlock or just pressing unlock and waiting for it??
 
J

j2dac

Full Member
May 12, 2010
42
0
Got it working kind of but it did not verify:

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 4518mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !
Click to expand...
??
 
J

j2dac

Full Member
May 12, 2010
42
0
bandit123 said:
r u putting alcohol swap on the hole when its trying to unlock or just pressing unlock and waiting for it??
Click to expand...
Yea it's already unlocked. Shows up with 0x00. I haven't been using an alcohol swab. My problem now is that it won't verify.

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 4518mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !
Click to expand...
 
M

mm53668

did you try re-writing when you got the fail? Sometimes I get that but if I rewrite it will go through the second time.
 
A

Argentum

VIP Member
Dec 13, 2011
388
0
Khobar, Saudi Arabia
try this:

- try writing several times.
- After writing even if it fails verification, read the fw from the pcb and load LT to target and write that and see if it verifies the write.

If every thing did not work pm me I have replacement PCB with free shipping :D
 
You must log in or register to reply here.