LITEON DG-16D2S Unrecognized disc Lt+3.0

[JyuubiNaruto]

Wont read DBZ:UT Backup heres jf log put zero's for a few numbers in my drive key for the post

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Fri Mar 09 18:44:35 2012



This is a Wow 64 process running on a 64 bit CPU

X360USB PRO detected, Version 0.18



portio64.sys Driver Installed

portio64.sys Driver Started, thanks Schtrom !

Found 5 I/O Ports.

Found 1 Com Ports.

Found 7 windows drives C: D: E: G: H: I: J:

Found 1 CD/DVD drives E:



Loading firmware file C:\Users\theresa rael\Documents\Dummy.bin

MD5 hash: 765316a7b16ff4188b7f8e5d3b1db1b1

Inquiry string found

Identify string found

Drive key @ 0xA030 3A8EB81DE000000000000000

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Auto-Loading firmware file C:\Users\theresa rael\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0251-v3.0.bin

MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied

Sending Vendor Intro to port 0x0000

Status 0x90

Re-sending Vendor Intro:

...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Device Intro failed!



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x90

...........

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0x0000

 

[bigpa2]

Im having the same prob. Reflashed 3 times. Pretty much tried all the pot tweet settings with no luck. I dont get it. It's a new drive. It will read original disks but not any backup disks. Please help!!!

 

[JyuubiNaruto]

Same with me and i just checked the backup on abgx its 100% fine

 

[reefz3ro]

does it play originals or other backups?

Your outro does not look like it completed

also what kind of media did you use for burn/how did you burn it and what are your kprobe results for the burn

 

[JyuubiNaruto]

It plays originals
idk should i reflash
Memorex from wal-mart i been using them for ever and always worked fine,imgburn,ihas burner124b and kprobe?

 

[cloveskat]

with 2.0 had no problems with memorex.. went to 3.0 and with ihas 324 i use only verb burned at 4x and have no issues

 

[Justice1231]

When are people going to wake up, search, and read what has been posted lots of times before, to be able to get your backups to work, you need an Ihas burner with burnermax firmware, then you will need verbs. Most people who do this dont have an issue, its only the few that dont take this advice that have the problems, and im sure Uber said somewhere unless you are using the burner and verbs then no support will be given.

 

[reefz3ro]

my guess is its the way it was burned/disc or combo of the two that is your problem but without at least a kprobe test cant tell if the burn is good or not

I don't think DBZ-TU is an XGD3 game but still get your self the right media and proper burner with the burnmax firmware flashed on it

 

[DrunkenNinja]

Your probably running discs without the topology data inserted, you should also post a kprobe can so we can establish the quality of the burn.

What drive are you using to burn the disc & what discs are you using?

 

[JyuubiNaruto]

I do have a burner max firmware drive 124b and im looking up kprobe right now

 

[Oggy]

does it play originals or other backups?

Your outro does not look like it completed

also what kind of media did you use for burn/how did you burn it and what are your kprobe results for the burn

it doesn't 'fail'

nothing is put in the running log as its just a reset, it doesn't need to 'complete' its just a command

 

[JyuubiNaruto]

Thanks all but no thanks i figured it out myself guys