Update After PCB change
- Thread starter newnick
- Start date
there are two unlocked PCBs for the slim lite-on, one made by xecuter and the other made by team matrix.
the xecuter PCB there is a switch to unlock it, the matrix board I think is software unlocked and flashed with their own software.
if you open your drive and look at the PCB the xecuter is a white board and the matrix board is blue, stock is green
the xecuter PCB there is a switch to unlock it, the matrix board I think is software unlocked and flashed with their own software.
if you open your drive and look at the PCB the xecuter is a white board and the matrix board is blue, stock is green
If its an unlock pcb board replacement then see section 4 from here http://xbox360.dashhacks.com/2011/07/20/big-guide-unlocking-flashing-your-slim-liteon-drive
you need to figure out what PCB you have, for xecuter flip the switch to unlock, for the matrix board you need to use the matrix software, and for a stock board unlocked with the kamikaze hack you need to use jungleflasher and use a cotton swab with isopropyl alcohol
why are you trying to slimkey an xecuter pcb?got my X360USB Pro but im out of luck. I'm trying to read Xecuter PCB key but i always get slimkey failed. Can anyone help me?
slimkey only works on original type pcbs
if you wish to read fw off a replacement pcb, set wp=1, put it into vendor mode, unlock the spi, then read
just like the tutorial says