FIXED Update NAND-X Firmware problem

[Dixed]

Hi guys, just purchased a NAND-X update cable to update my NAND-X V2.
I've setup everything like the tutorial states and made sure the drivers for the update cable are installed correctly.
Just after i hit start i get this message...

any ideas how to fix?
thanks

 

[Martin C]

CTRL-PRTSCN.

Then open MS paint.

Press CTRL-V to paste.

You've now just taken a screenshot.

The problem is you have the wrong device selected. It should be LPC 2148.

 

[Dixed]

CTRL-PRTSCN.

Then open MS paint.

Press CTRL-V to paste.

You've now just taken a screenshot.

The problem is you have the wrong device selected. It should be LPC 2148.

Im running windows on my Mac so im not sure what button is PRNTSCN.

Thanks for the help

---------- Post added at 07:32 ---------- Previous post was at 07:27 ----------

There is no LPC 2148 in the device database

 

[Martin C]

There is no LPC 2148 in the device database

There is - it's under the ARM7 folder (above the one which opens automatically).

 

[Dixed]

Think i need my brain checked. Thanks again Martin

 

[Martin C]

No worries!