RGH Updated Dash to 14699 but forgot about DVD drive

[-DoC-]

Hey guys.

I did a RGH on a Jasper tonight with a Liteon drive.

Anyway I used Jrunner to bring the dash up to 14699 but forgot about updating the DVD drive. It's still on 74850c.

What's the best way to bring this up to the current 16D2s?

Thank you!

 

[WestCoastConsoles]

Flash it with 0251 firmware.

 

[djxxx]

Just use jungle flasher and flash with 0251 firmware making sure you have correct key for your DVD drive

 

[-DoC-]

Ok thank you!

That's what I started doing last night but it gave me some error about the strings or LT not matching for firmware.

I already have the key and firmware dumped.

Thanks again.

 

[Coleman]

Not going to match because it wasn't updated to the new firmware but you'll be ok.

 

[prankster]

Ok thank you!

That's what I started doing last night but it gave me some error about the strings or LT not matching for firmware.

I already have the key and firmware dumped.

Thanks again.

Once updated to 02510c, all serial info for DG16D2S drives are the same, it's normal to receive that warning if you flash to 02510c using a dummy.bin from a 74850c or any other phat liteon firmware < 02510c.

 

[-DoC-]

Thanks again,

I just wanted to make sure before I flashed the drive because that's what I did initially but received that warning.

 

[-DoC-]

Thanks guys....All set!