Updated my rgh to dash 14719 now wont boot to xell

[mys3lf]

I have updated my rgh xbox 360 to the lastest dashboard now wont boot to xell or dash what can i do...
i have a matrix glitcher I and maximus nandflasher.
can someone link to a tutorial or say what to do...

 

[InfamousJoe]

I'll just stop you right there

See the sticky at the top of the page by Xecuter that says "IMPORTANT: READ FIRST" ?

It is telling you to read it before you post anything as its important information.

I'll even quote it for you if you are too lazy to click the link....

You may have already seen the rules at the top of your screen. There is no excuse for not reading or understanding them.

If you have a problem with following these very simple rules then there is no need for you to post here - you are more than welcome to read the info that we offer without filling the forums with garbage.

Thanks

GOLDEN RULES

1. NO PIRACY TALK. THAT MEANS NO TALK ABOUT RELEASE GROUPS, WAREZ, TORRENTS, NEWSGROUPS OR ANYTHING ELSE TO DO WITH PIRACY.
2. NO SELLING. ONLY VIP MEMBERS ARE ALLOWED TO SELL ITEMS OR OFFER SERVICES
3. NO ILLEGAL FIRMWARE LINKS
4. THIS IS AN XECUTER PRODUCT SUPPORT COMMUNITY. WE DO NOT OFFER SUPPORT FOR ANY OTHER PRODUCTS OR TEAMS. DO NOT ASK FOR SUPPORT IF YOUR PROBLEM DOES NOT INVOLVE AN XECUTER PRODUCT !
5. DO NOT BE LAZY - SEARCH AND READ FIRST. WE ARE NOT HERE TO HOLD YOUR HAND OR TO TREAT YOU LIKE A BABY. WE ARE NOT YOUR MOMMA.

BREAK THESE RULES AND YOUR POSTS MAY BE DELETED AND YOUR ACCOUNT MAY BE BANNED. IT'S THAT SIMPLE.

IF YOU DIDN'T READ THESE RULES AND YOU ARE CRYING AFTER YOU BROKE THEM - THEN MAYBE YOU SHOULD STOP ACTING LIKE A BABY AND TAKE IT AS A LESSON THAT MAYBE YOU SHOULD READ SOMETHING THAT WAS ENTITLED "IMPORTANT READ THIS FIRST" NEXT TIME.

 

[tonyjandc]

lol before anyone posts any more comments I;de better inform you of two things

1 YOU ARE LOOKING IN THE WRONG PLACE
2 YOU HAVE JOINED TEAM XCUTER AS IT STATES AS YOU JOINED THIS FORUM IS FOR TEAM X PRODUCTS .

So good luck in your search but don't expect to find it here :facepalm:

 

[MANUMAN]

your in the wrong place buddy.max is your friend

 

[bandit123]

 

[mys3lf]

lol before anyone posts any more comments I;de better inform you of two things

1 YOU ARE LOOKING IN THE WRONG PLACE
2 YOU HAVE JOINED TEAM XCUTER AS IT STATES AS YOU JOINED THIS FORUM IS FOR TEAM X PRODUCTS .

So good luck in your search but don't expect to find it here :facepalm:

I just need help and if you can help just stay away...
atm i dont have x products because i waiting for daemon to dual nand... so before you saying stupid words wait and listening...

 

[jeremy790]

Your LDV values are probably wrong. You give no good info and don't own TX products. But you come to us for help. Where is your Matrix support?

 

[mys3lf]

Your LDV values are probably wrong. You give no good info and don't own TX products. But you come to us for help. Where is your Matrix support?

you're right. i dont have. because I did not realized rgh to my xbox was another person. he have insttaled that and give me a nandflasher . so dont blame me if i dont have x products. when demon released i will buy one for dual nand.
What kind of info you need?

 

[Dark_Riku]

Different product maybe...but let's be grown up here and actually help the guy instead of immature facepalm pictures. All he did was explained his set up. If that's a violation on this site...very well. But i highly doubt it.

We need info such as What kernel you were running before you updated, which method you updated with, pictures of the soldering job, what tool you used etc.

 

[frayed]

Different product maybe...but let's be grown up here and actually help the guy instead of immature facepalm pictures. All he did was explained his set up. If that's a violation on this site...very well. But i highly doubt it.

We need info such as What kernel you were running before you updated, which method you updated with, pictures of the soldering job, what tool you used etc.

just in case you forgot where you are please refer to the picture below

^^^^ yes that one.. the one that says TEAM XECUTER SUPPORT FORUMS

oh and the rules too:

http://www.team-xecuter.com/forums/showthread.php?t=78835

 

[Dark_Riku]

just in case you forgot where you are please refer to the picture below

Link To Image

^^^^ yes that one.. the one that says TEAM XECUTER SUPPORT FORUMS

I don't mean to be rude or anything. But where the hell does that sat TEAM XECUTER PRODUCT SUPPORT FORUMS >.<

This is a software related issue. Not Hardware so the product statement is invalid. If it was about the Hardware then fair enough.

Don't be so stuck up. The guy asked for help, you can at least be mature about it and maybe help him.

 

[Fisticuffs]

I don't mean to be rude or anything. But where the hell does that sat TEAM XECUTER PRODUCT SUPPORT FORUMS >.<

Don't be so stuck up. The guy asked for help, you can at least be mature about it and maybe help him.

If you can't figure out this forum is for TX products, Then you have no common sense, It doesn't say TX hacking forums, It says TX SUPPORT forums :crazy:

 

[Dark_Riku]

If you can't figure out this forum is for TX products, Then you have no common sense, It doesn't say TX hacking forums, It says TX SUPPORT forums :crazy:

The contradiction in that statement is amusing.

 

[tonyjandc]

Right now my backs against the wall on this and Im slightly peeed at your comment regarding its a software issue.
I will make a statement here regarding your comment . To produce his nand dumps he needed to use products . The products he used were note made or endorsed by team x.
This forum clearly states team x support . I will not get into a cat fight but this statement has been made many times. Note to mods . Please move this thread to trash .

 

[Dark_Riku]

Right now my backs against the wall on this and Im slightly peeed at your comment regarding its a software issue.
I will make a statement here regarding your comment . To produce his nand dumps he needed to use products . The products he used were note made or endorsed by team x.
This forum clearly states team x support . I will not get into a cat fight but this statement has been made many times. Note to mods . Please move this thread to trash .

"I have updated my rgh xbox 360 to the lastest dashboard now wont boot to xell or dash what can i do..."

Tell me...where does that mention ANYTHING about USING Maximus' inferior products? It doesn't...he could have flashed with XeLL/XeLLous, or even that Flash360 application. All he did was stated he had those products. He didn't state he wanted support for those products. Again this is a software issue.

 

[tonyjandc]

Regarding how he flashed how was the nand dumps got in the first place . I do agree this is software, but to get and use software you need hardware

Right Im a 42 year old father of 3 I think it's best we end it here and agree to disagree

 

[Dark_Riku]

Regarding how he flashed how was the nand dumps got in the first place . I do agree this is software, but to get and use software you need hardware

Right Im a 42 year old father of 3 I think it's best we end it here and agree to disagree

I'm not looking for a fight with anyone on this forum. I respect TX in every way, have purchased their products since the XB1 days. I support everyone that is helping around with Xecuter support. But when people mouth off about oh we're not going to help you because you didn't purchase this or own this. It's pathetic and futile. Remember the XBox 1 days? Everybody helped each other out. Nowadays it's all about fame, ignorance and stuck up people. But the fact of the matter is...99% of these people are just sheep following the Masterminds who made this all possible.

I believe in free knowledge. Free tools, free support regardless of which hardware or software they are using to exploit their hardware.

It's wrong not to help someone because of different hardware. Why did he come to TX forums? Because he knows they are superior to any other competitor on the market. Support is a key item from TX and has been for a long time. Why should this be any different.

Let this be seen, for the sake of this community and many others. Sharing is caring. I'm done.

 

[TilVl]

Also helping and showing why xecuter is best will make sure he buys xecuter in the future.

Rebuild your nand with jrunner and reflash with your nandflasher. Or if you casn boot xexmenu get flash360 build image with jrunner then use flash360 to flash it.

Sent from my SGH-T839 using Tapatalk

 

[Dark_Riku]

No kidding. Is it really that hard to help him with the problem? At least point him in the right direction. Obviously we can't tell him how to use his equipment since it's not TX, but we can tell him what needs to be done and let him figure it out from there. Jees. :crazy:

Now if only we had a lot more people with this encouragement to help others. Respect to you Sir.

 

[Justice1231]

This is funny, you wouldnt buy a samsung tv and then go to panasonic for help if it doesnt work would you.