Updated my rgh to dash 14719 now wont boot to xell

Status
Not open for further replies.

Dark_Riku

VIP Member
Mar 2, 2012
356
0
This is funny, you wouldnt buy a samsung tv and then go to panasonic for help if it doesnt work would you.
Another one who fails to see the point. The RGH exploit and JTAG exploit wasn't created or founded by TX or Maximus. Like I've stated various times. This is not about the hardware. It's the principle of helping the dude, and not bashing him about him having an inferior product. Just grow up, and if you wish to support the site and help, then do so. If you have nothing positive to say then don't bother posting at all.
 
  • Like
Reactions: Krafter

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
Another one who fails to see the point. The RGH exploit and JTAG exploit wasn't created or founded by TX or Maximus. Like I've stated various times. This is not about the hardware. It's the principle of helping the dude, and not bashing him about him having an inferior product. Just grow up, and if you wish to support the site and help, then do so. If you have nothing positive to say then don't bother posting at all.
Granted but then again panasonic or samsung didnt create the tv either, the fact is the op is using maximus products and there is a support forum for people with maximus products, as it states at the top of the fourm this is a team xecuter support fourm, not a maximus forum.
Now do you see the point.
 
Last edited:

Dark_Riku

VIP Member
Mar 2, 2012
356
0
Granted but then again panasonic or samsung didnt create the tv either, the fact is the op is using maximus products and there is a support forum for people with maximus products, as it states at the top of the fourm this is a team xecuter support fourm, not a maximus forum.
Now do you see the point.
You're missing the point actually. I don't see this Forum titled TX Coolrunner and NAND X support forum. "Team Xecuter » Support For Noobs & Beginners » RGH / JTAG 4 Noobs" Where in that title does it state that it is hardware specific?
 

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
No im not missing the point i know excaclty where you are coming from but how many times does it have to be said before it gets through, this is a team executer support fourm for people with xectuer products, not maximus products, there is a support for their products, im sure there are forums out there for people like you who want to share there knowledge which doesnt matter what products you have. but this is a Support forum for people with executer products.
Put it another way, If you were to own and distribute a product and someone goes into competion with you distributing a similar product, would you support the people who bought your competitors product?
 
  • Like
Reactions: frayed and afsilver

Dark_Riku

VIP Member
Mar 2, 2012
356
0
No im not missing the point i know excaclty where you are coming from but how many times does it have to be said before it gets through, this is a team executer support fourm for people with xectuer products, not maximus products, there is a support for their products, im sure there are forums out there for people like you who want to share there knowledge which doesnt matter what products you have. but this is a Support forum for people with executer products.
Put it another way, If you were to own and distribute a product and someone goes into competion with you distributing a similar product, would you support the people who bought your competitors product?
Yes I would support people like that at all costs. But it's quite obvious people don't want to help other. Which is pretty selfish. Competitor product or not. This is a SUPPORT forum not for any specific product. But for SUPPORT. /Thread.

Not to mention..he only asked about WHY his XeLL wouldn't boot after he updated. That has nothing to do with the hardware.
 
Last edited:

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
like ive already said, there are probably forums out there that dont care what product you use but this is a xecuter fourm and the op has already stated that he doesnt own any, this forum was designed to help poeple who where haveing problems with their products not the competitors products, but if you cant grasp that fact then i dont know what else to say for you to understand.
Oh and if you ever release a product remind me not to buy shares in it as you wont last long if your willing to help your compeitors.
 
Last edited:
  • Like
Reactions: Ubergeek and frayed

sherlock

Troll Eating Dogs
this has gone on long enough, this a team Xecuter support forum for people who buy and use Xecuter products, end off.
 
  • Like
Reactions: frayed and talby71

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Yes I would support people like that at all costs. But it's quite obvious people don't want to help other. Which is pretty selfish. Competitor product or not. This is a SUPPORT forum not for any specific product.
what are you talking about ?

This is the XECUTER PRODUCT SUPPORT FORUM

What gave you the impression it was anything else ? It's the name of the forum and in the rules that you are supposed to read


You're missing the point actually. I don't see this Forum titled TX Coolrunner and NAND X support forum. "Team Xecuter » Support For Noobs & Beginners » RGH / JTAG 4 Noobs" Where in that title does it state that it is hardware specific?
No - YOU are missing the point

This is the XECUTER PRODUCT SUPPORT website

Check this thread out thats entitled IMPORTANT: READ FIRST - its a sticky at the top of every noob forum

You may have already seen the rules at the top of your screen. There is no excuse for not reading or understanding them.

If you have a problem with following these very simple rules then there is no need for you to post here - you are more than welcome to read the info that we offer without filling the forums with garbage.

Thanks :)

GOLDEN RULES

1. NO PIRACY TALK. THAT MEANS NO TALK ABOUT RELEASE GROUPS, WAREZ, TORRENTS, NEWSGROUPS OR ANYTHING ELSE TO DO WITH PIRACY.
2. NO SELLING. ONLY VIP MEMBERS ARE ALLOWED TO SELL ITEMS OR OFFER SERVICES
3. NO ILLEGAL FIRMWARE LINKS
4. THIS IS AN XECUTER PRODUCT SUPPORT COMMUNITY. WE DO NOT OFFER SUPPORT FOR ANY OTHER PRODUCTS OR TEAMS. DO NOT ASK FOR SUPPORT IF YOUR PROBLEM DOES NOT INVOLVE AN XECUTER PRODUCT !
5. DO NOT BE LAZY - SEARCH AND READ FIRST. WE ARE NOT HERE TO HOLD YOUR HAND OR TO TREAT YOU LIKE A BABY. WE ARE NOT YOUR MOMMA.

BREAK THESE RULES AND YOUR POSTS MAY BE DELETED AND YOUR ACCOUNT MAY BE BANNED. IT'S THAT SIMPLE.

IF YOU DIDN'T READ THESE RULES AND YOU ARE CRYING AFTER YOU BROKE THEM - THEN MAYBE YOU SHOULD STOP ACTING LIKE A BABY AND TAKE IT AS A LESSON THAT MAYBE YOU SHOULD READ SOMETHING THAT WAS ENTITLED "IMPORTANT READ THIS FIRST" NEXT TIME.
These rules have been in place for years and are there to keep the site in order. It is not our fault that you did not read the rules (or the OP) - so you cannot be surprised if those who do read the rules and are respectful of the site call you out for not doing so.
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
I have updated my rgh xbox 360 to the lastest dashboard now wont boot to xell or dash what can i do...
i have a matrix glitcher I and maximus nandflasher.
can someone link to a tutorial or say what to do...
I'm sorry pal - but this is the Xecuter product Support forums so we can't help you with your problem as you are not using Xecuter products (the rules that we ask you to read when you join tell you this)

I'm sure you can find your answers if you read what others have posted in similar situations (the rules that we ask you to read when you join also tell you this)
 

Fisticuffs

VIP Member
Mar 14, 2011
1,316
68
Arizona, US
You're missing the point actually. I don't see this Forum titled TX Coolrunner and NAND X support forum. "Team Xecuter » Support For Noobs & Beginners » RGH / JTAG 4 Noobs" Where in that title does it state that it is hardware specific?
Support For Noobs & Beginners of TX products, Dur...
 

Rome 16:16

VIP Member
Apr 19, 2011
296
0
City of Pines, PHL
Another one who fails to see the point. The RGH exploit and JTAG exploit wasn't created or founded by TX or Maximus. Like I've stated various times. This is not about the hardware. It's the principle of helping the dude, and not bashing him about him having an inferior product. Just grow up, and if you wish to support the site and help, then do so. If you have nothing positive to say then don't bother posting at all.
This is TX Forum and as such, members as expected to have been using TX products. So for me, how would I be able to correctly answer questions involving other products which I don't even own and more so not actually used. Sometimes its just commonsense: Suppose you yourself own a company and people come to you asking for support for products manufactured by your rival company, what would you do?
 
  • Like
Reactions: Fisticuffs

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
No im not missing the point i know excaclty where you are coming from but how many times does it have to be said before it gets through, this is a team executer support fourm for people with xectuer products, not maximus products, there is a support for their products, im sure there are forums out there for people like you who want to share there knowledge which doesnt matter what products you have. but this is a Support forum for people with executer products.
Put it another way, If you were to own and distribute a product and someone goes into competion with you distributing a similar product, would you support the people who bought your competitors product?
Yes I would support people like that at all costs. But it's quite obvious people don't want to help other. Which is pretty selfish. Competitor product or not. This is a SUPPORT forum not for any specific product. But for SUPPORT. /Thread.

Not to mention..he only asked about WHY his XeLL wouldn't boot after he updated. That has nothing to do with the hardware.
Rome 16:16 ive already asked that question and this is his/her reply:eek2:
 

Rome 16:16

VIP Member
Apr 19, 2011
296
0
City of Pines, PHL
I'm assuming that members of this site are exclusively using TX products. So if this is the case, even though how much we wanted to answer questions involving other products off TX, we won't be able to answer satisfactorily. I might be wrong though coz others might be using various products from different manufacturers, but the question now is, are we allowed to do so.
 

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
You can of course choose to use other products but support provided here is for Xecuter products only hence the forum's name - "Team Xecuter".

Maximus and Matrix should both have their own support forums for their products, I think they would get just as pissed if we were to head over to them with issues regarding Xecuter hardware.


I will close this thread (for now) and an admin or another moderator will open it again if they see fit to do so.
 
Last edited:
Status
Not open for further replies.