RGH updating help again...

[DailyRentals]

So i have a demon and i need to update both sides.
problem is that my retail side is on update 12625 and my RGH nand is on like 147**. So im guessing i have a RGH1 but i need a RGH2 to update my retail via console right?? need a little guidence what do i do to update both sides correctly?

 

[BL4K3Y]

Before following the next four steps, ensure you have your CPU key saved somewhere.

1. Update the retail NAND to 15574 and dump it.

2. Re-wire the console for RGH2.

3. Program the relevant EN XSVF timing file to your CoolRunner so the DemoN is able to switch between retail and glitch.

4. Build a 15574 glitch image (using your CPU key and the NAND dump you made in step one) and write it to the DemoN.

 

[DailyRentals]

Before following the next four steps, ensure you have your CPU key saved somewhere.

1. Update the retail NAND to 15574 and dump it.

2. Re-wire the console for RGH2.

3. Program the relevant EN XSVF timing file to your CoolRunner so the DemoN is able to switch between retail and glitch.

4. Build a 15574 glitch image (using your CPU key and the NAND dump you made in step one) and write it to the DemoN.

i bought from someone. i cant just rewire it myself to 2.0..?? how would i update the retail to 15574???

 

[Martin C]

What console do you have?

 

[DailyRentals]

What console do you have?

a phat zephyr

 

[Goldensavage]

i bought from someone. i cant just rewire it myself to 2.0..?? how would i update the retail to 15574???

If you purchased it from someone. Then they as a seller of such items should have known that RGH1 would have been no good for Live on a dual nand.

If you update the retail to 15574. You glitch will not work as it will need the RGH2 wiriing, Full stop

Either they change the wiring and update it. Or you do

 

[DailyRentals]

He told me it would be fine now neither side is booting... What do I do?? Reflash both hands? And how xell won't even boot...

 

[Repoman 108]

If you updated the retail side of an RGH1 zephyr to 15574 then the CB was split, necessitating RGH2 to keep using a modded NAND at all. i.e. I'm not surprised Xell and RGH side doesn't boot but I'm fairly sure retail side should still boot (correct me if RGH1 wiring interferes with retail NAND). If you have updated past 14719, you MUST redo the wiring to RGH2 before it will boot any modified NAND image; you can't go back to RGH1.

 

[XL3THAL VIP3RX]

He told me it would be fine now neither side is booting... What do I do?? Reflash both hands? And how xell won't even boot...

he told you what would be ok?to just go ahead and update the retail side via XBL?
if this is so,id be going to see the guy and get him to sort it out:rolleyes2: