SAMSUNG MS25 Updating to Lt1.9 - PLAY DVD error

P

placebostar

Noob Account
Sep 28, 2011
1
0
Ok so i will list all the steps of what i did and maybe i will find out what is wrong

1. Connected my Drive to the PC using SATA cable and power from the console.
2.Jungle flasher didn't recognize my drive so i used DOS FLASh to read and write the flash.
3.Read the firmware from my console ( ixtreme 1.4) and got the DVD key in jungle flasher and spoffed over the stock ms25 from the jungleflasher pack.
4.Put the stock flash in the console with DOSFLASh
5.updated with the new dashboard from USB Stick.
6.Read the firmware from console and spoffed over " sammy Lt vers 1.9" from the jungleflasher pack .
7.Updated with DOSFLASH and it says now updated to 1.9 with my original CD key .

Problem : NO DVD will work even the original ones(i ave Kinect adventures) , it says PLAY DVD or it freezes on XBOX logo.

The jungleflasher didn't recogize my drive even if i used the activate.iso (on the dos flash it worked right away)

i have a gigabyte mainboard with nforce 630 chipset .

ANY advice ?
thanks
 
R

reda2006

VIP Member
Nov 26, 2010
162
0
HERE
all these troubles will be solved with X360USBPRO

get one ASAP

good luck
 
S

samlen27

Full Member
Jan 2, 2011
33
0
did u use the latest jungleflasher i had same problem once and it was because i used the old version of jungleflasher when i redone it with new version it was fine.
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
looks like your key hasn't been put onto your drive
have you got any logs that you can post ?
 
V

V3nn3tj3

Full Member
Jun 30, 2011
62
0
Belgium
I had the same problem...
Can't remember how i fixed it tho, maybe get the right hardware?
 
Last edited:
You must log in or register to reply here.