Can you get the drive key with a ck3 mini connected to a ck3 probe 3? I don't see any kind of connector to the com port.
ANSWERED Using the CK3 probe 3 with the CK3 Mini
- Thread starter mankill88888
- Start date
Lmfao. Probe 3 has nothing to do with a com port. It runs of the ground of the DVD power cable. You will have no issues with a ck3 mini probe 3 combo.
Yes you can you need to connect the power cable with the probe to the ck3 mini.And you dont need a com port. 
Okay thanks. I need some help with the PMT method then. It says have a switch across the 3.3 volt line, which I do. For whatever reason, every time try the method, it will say extraction successful, then verification failed. Was there anything beyond just putting a switch on the 3.3 volt line? It says:
Also:
Red/Brown wire joined to 3.3v line
Black wire straight to ground / probe
but the picture doesn't look like a ck3 probe 3.
Also:
Red/Brown wire joined to 3.3v line
Black wire straight to ground / probe
but the picture doesn't look like a ck3 probe 3.
Hey guys, I need help please. I have a phat liteon 93450 drive
I have the 360usb, ck3 mini, molex adapter, and probe 3. I have opened the hard drive cuz I need to extract key first cuz its a lite-on
I put sata cable in the drive and the other end in the usb 360 pro. Then connected the gray wire (mini usb) into the usb into my laptop
Then I took the probe 3 wire, Long wire, put it in the drive and the other end I connected to ck3i mini. I then took the wire with red black and yellow colors (the mini version) put it in the ck3 mini and the other end into the adapter to connect to molex. The problem is when I start JF, it doesnt read drive. I havetried to touch the probe 3 with the drive in the right spot and when touching i press the switch on the probe 3 but it doesnt power it.
Can someone please help if I havent confused you? Thanks
I have the 360usb, ck3 mini, molex adapter, and probe 3. I have opened the hard drive cuz I need to extract key first cuz its a lite-on
I put sata cable in the drive and the other end in the usb 360 pro. Then connected the gray wire (mini usb) into the usb into my laptop
Then I took the probe 3 wire, Long wire, put it in the drive and the other end I connected to ck3i mini. I then took the wire with red black and yellow colors (the mini version) put it in the ck3 mini and the other end into the adapter to connect to molex. The problem is when I start JF, it doesnt read drive. I havetried to touch the probe 3 with the drive in the right spot and when touching i press the switch on the probe 3 but it doesnt power it.
Can someone please help if I havent confused you? Thanks