CORONA V3/V5 CR4XL

CaptainBlood

VIP Member
Mar 11, 2013
168
0
Thanks so much to Team Xecuter for theyr amazing product expecially Postfix Adapter (original TX is amazing quality) and CR4XL,me and my customer is always ready to buy amazing TX product.

Photo Install: http://imgur.com/dN6ysg2
ProRater Result Image:
1 http://imgur.com/i2XKxMn
2 http://imgur.com/YstzhBv

(C5R11 C 9cm to CR4XL Post 7cm to 5 pad Postfix V2 / DIP 3 / 10PF / 100 ohms)
(i like to write it like this C 9-0 / P 7-5 / 3 / 10PF / 100 )
BOOT UNDER 30SEC / BOOT UNDER 1 MIN / BOOT UP TO 1 MIN / GLOBAL BOOT UNDER 20 SECOND
1° TEST: 19 / 1 / 0 / (16) | 1, 1, 2, 1, 1, 4, 1, 2, 1, 1, 1, 1, 8, 1, 5, 1, 4, 1, 1, 1
2° TEST: 18 / 2 / 0 / (16) | 1, 2, 2, 1, 4, 1, 1, 3, 5, 1, 3, 1, 1, 10, 1, 1, 1, 1, 7, 2

I use DEFAULT TX original Cable from the CR4XL pack box
I use ECC original software created from Jrunner V3 Beta 7 whit CR4 button checked already included in the jrunner core + update
Read the 17349 Dashboard Nand of the console whit NANDX and JRUNNER (3 perfect read,no bad block,nand compare nand are the same) then create the ECC whit JRUNNER (i dont remember if i write the ecc then whit nandx or whit jrprogrammer v2.. dont ask me why lol can be i change it sometime)
Motherboard: X862605-002 CORONA V3\V5
Console: Halo 4 Limited Edition (Pal \ Eu)
Mrf Date: 08-26-12

-No post trace
-Miss R2c6 and R2c6 so i bridge it (r2c10 no because is already on the motherboard)
-Nand Hynix HY27USD8281A (i can't say for sure 100% the HY.. code is this because is not easy readable...half deleted)
-Vram Samsung 213

Temperature Note: Ambient 38 °C July 2015 (italy) http://imgur.com/RGhNpGh
Time Note: Notice i set Only 15 second between each restart (no cooldown so from one boot and another anyway amazing boot time)

Old Test:
BOOT UNDER 30SEC / BOOT UNDER 1 MIN / BOOT UP TO 1 MIN / GLOBAL BOOT UNDER 20 SECOND

CPU RST POINT / CPURST WIRE CM - SLIM POST QSB V3 PAD (if when use it LOL) / POST WIRE CM - POSTFIX QSB PAD / DIP SWITCH / PF / OHMS

C5R11 C 9-0 P 7-5 / 3 / NOPF / 0
1° TEST: 19 / 1 / 0 / (16) | 1,5,3,2,1,2,1,2,1,3,2,5,7,2,4,2,3,1,3,3
2° TEST: 17 / 3 / 0 / (13) | 1,4,1,5,3,2,10,1,5,5,2,6,3,1,2,2,6,1,1,1

C5R11 C 9-0 P 7-5 / 3 / NOPF / 10 ohms
1° TEST: 16 / 3 / 1 / (11) | 4, 1, 7, 3, 3, 2, 4, 10, 1, 2, 6, 3, 4, 2, 1, 14, 2, 5, 3, 5
2° TEST: 17 / 3 / 0 / (12) | 4, 1, 3, 4, 2, 1, 2, 1, 1, 7, 6, 1, 2, 2, 1, 4, 1, 1, 6, 5

C5R11 C 9-0 P 7-5 / 3 / NOPF / 100 ohms
GOOD
1° TEST: 19 / 1 / 0 / (19) | 2, 1, 9, 2, 3, 1, 2, 1, 1, 3, 1, 1, 2, 2, 3, 1, 3, 1, 1, 1
2° TEST: 17 / 3 / 0 / (16) | 1, 1, 3, 2, 1, 1, 1, 2, 10, 2, 7, 4, 3, 1, 9, 2, 1, 2, 2, 1

C5R11 C 9-0 P 7-5 / 3 / 10PF / 100 ohms BEST i like
1° TEST: 19 / 1 / 0 / (16) | 1, 1, 2, 1, 1, 4, 1, 2, 1, 1, 1, 1, 8, 1, 5, 1, 4, 1, 1, 1
2° TEST: 18 / 2 / 0 / (16) | 1, 2, 2, 1, 4, 1, 1, 3, 5, 1, 3, 1, 1, 10, 1, 1, 1, 1, 7, 2

C5R11 C 9-0 P 7-5 / 3 / 22PF / 100
1° TEST: 14 / 6 / 0 / (10)
4, 6, 3, 12, 7, 3, 11, 3, 2, 3, 1, 4, 24, 4, 1, 12, 1, 2, 4, 1
2° TEST: 17/ 2 / 1 / (14) 5, 3, 1, 1, 3, 1, 3, 1, 16, 3, 3, 2, 3, 5, 4, 1, 6, 1, 3, 10,


C5R11 C 9-0 P 7-5 / 3 / 22PF / 100
1° TEST: 14 / 6 / 0 / (10)
4, 6, 3, 12, 7, 3, 11, 3, 2, 3, 1, 4, 24, 4, 1, 12, 1, 2, 4, 1
2° TEST: 17/ 2 / 1 / (14) 5, 3, 1, 1, 3, 1, 3, 1, 16, 3, 3, 2, 3, 5, 4, 1, 6, 1, 3, 10

C5R11 C 9-0 P 7-5 / 2 / 0PF / 0
1° TEST: 13/ 5 / 2 / (10) | 11, 5, 3, 6, 2, 2, 1, 5, 1, 7, 2, 3, 4, 1, 12+, 10, 7, 1, 10, 3


All this the same results also: (
1° TEST: Deleted 12+,12+,12+ etc.)
C5R11 C 9-0 P 7-5 / 4 / 0PF / 0

C5R11 C 9-0 P 7-5 / 4 / 0PF / 100
C5R11 C 9-0 P 7-50 / 3 / 0PF / 100


Thanks to all TX team that make hardware tx
thanks to who make jrunner it is awesome i always use it more than other
Thanks to all people that make prorater and that include it can save image or copy the result to clipboard




 
Last edited:
  • Like
Reactions: andoryuu3

andoryuu3

VIP Member
Dec 19, 2015
56
13
I realize this is a post from 2015, but I just wanted to say thank you for posting your configuration. I also have a H4 edition Corona v3, and (assuming the consoles are similar) this will be good reference to fine tune my setup.

Currently I'm running default config and the boot times are horrendous (sometimes 15+ cycles) compared to what I'm used to (3 cycles max). This is my first Corona board, so we'll see what I can manage. I may purchase a TX multicap addon to make my tests super easy.