verbs MKM003 problem

[memad]

Hi guys,

I was trying to burn the witcher 2 on a verb mkm-003 and i has 124b lets say first i never had a single coaster with verbs and never used any thing else but verbs, but after i burnt the game when i try to play it i get unreadable disc i am on lt+3.

opc on
4x

kprobe:
pi max 238
pi avg 2.8
pif max 58
pif avg .02

nero results
quality:93

PI Errors
Maximum: 37
Average: 2.04
Total: 67942
PI failures
Maximum: 3
Average: 0.01
Total: 3188


i know the max is high but it is only in one point and i have similar games with high single max points that works perfectly.

Any suggestions and thanks in advance.

P.S i have the original witcher 2 dvd but in agbx the verification still fails i think i hasnt been added to the database yet.

Edit

and a second coaster

Date : 4/26/2012 9:36:27 PM
Model : 2-0-0-0 D:ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation]
Speed : 4x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267023
Sampling count : 247573
Errors : 0
PI Max : 37
PI Average : 2.20
PI Total : 68292
PIF Max : 3
PIF Average : 0.18
PIF Total : 5503

 

[nosherfj]

you dont need abgx.only to check basic stealth or patch official xgd2,3 topology.
try patching the official topology data file XGD3.Profile.ID.F87A804E.top.data.v1 via xbc that;s your problem your drive must have dodgy laser and created topology that's beyond the +-20 acceptable levels. better to patch official topology anyway as it's from 35 dumps and average median gained.

 

[memad]

I dont want to sound stupid but i dont quite know what you are talking about what is the +-20 acceptable levels.

And what drive has a dodgy laser my xbox drive or my ihas??

and i even burned prototype2 just before it and works perfectly and all my xgd3 games work perfectly!!

 

[DrunkenNinja]

Given that the ihas worked with all other back ups, it is either a bad burn or a bad rip. Also review your opinion that kprobe results don't matter, cause they most defiantly do and the PIF max rating should not go above (5), if other games worked with kprobe readings outside the reccomended values then you were simply lucky, no more and no less.

 

[memad]

I dont say that kprobe values doesnt matter i most diffinetly agree that they matter but this rip was in the recommended values so does it mean that it is a bad rip or bad burn or a dodgy laser what do i have to change to replace???

 

[memad]

guys anu idea???

some one said i have to change imgburn settings the I/O bar in buffer size change to 512 mb does that matter??

 

[memad]

Guys am i missing something out here or is my problem soo noobish if you need extra info to help plzz say!!??

 

[x360ccm]

post a image like so as i lazy lol this is my worst back i had