RGH very weird problem with CR and BB Jasper

[thebomber]

hey guys how are you, so here im in a situation, which is weird to me actually :facepalm:

i rgh'd a BB jasper 5 days ago for some dude, was working perfect he decided to F**K with the console and updated to retial when it gave him rrod, anyway i thought it was a normal situation, and ldv increased thats all, well first no xell :crazy: console is in complete rrod:eek2:, so i hooked up the nand x and wrote the original nand 13604 dash, console booted fine, checked coolrunner cables all perfect in position, tried it to check if its blinking etc.. blinks , so i then went to write the ecc img, to check ldv, done booted console, CR doesnt blink, returned stock, CR Blinks, and so on :crazy:

can someone explain to me what the :rolleyes2: is going on with this weirdo, i even placed the nand in flash 360 tools showed ldv 7, i know its irrelevent, but tried ldv 8 with multibulider 0.7 , coolrunner doesnt blink also

and when i removed the coolrunner and retail dash console boots :crazy:

the console now is on retail dash, trying to rgh this BB , once again

 

[srt4fun]

Xell should boot regardless of the LDV. You've tried different tools to build/flash the .ecc file, right?

 

[thebomber]

well xell didnt boot cause the cr wasnt blinking, thought the problem with the wires , double checked everything is ok, thats when i decided to flash the stock nand, and found the coolrunner was blinking without any issues, well yes it didnt boot to the dash kep blinking every few seconds but at least it blinks indicating my connection is right, anyway, after i flashed the stock nand, i took another dump found differnces in plenty of blocks in the begining

i will try to bulid a retail 13604 image using multibulider and see what happnens after that

---------- Post added at 18:58 ---------- Previous post was at 18:57 ----------

ya one more thing after booting the console just now after 30 seconds or a min the cr blinked once then didnt blink again

---------- Post added at 19:01 ---------- Previous post was at 18:58 ----------

just now after another min, it blinked the second time, and a third time, then didnt blink, console still havent booted to xell

has been around 2 min and i have seen 3 blinks only

 

[thebomber]

flashed stock nand , xbox works, with coolrunner on stock it flashes normally but doesnt boot in , and ends in rrod with 0022

turn it to prg mode, retail dash boots

xell , it blinks like every min thats all

anyway im off to sleep if someone could help thx in advance

 

[srt4fun]

That is definitely interesting. It's weird that it's booting 13604 when an update was attempted, have the e-fuses been protected (R6T3 removed/Points bridged)? If so, then the LDV didn't increase and you should be able to flash a FreeBoot image made from the original nand. Couldn't hurt to try I guess...

 

[thebomber]

they werent actually i rghd a few days for some guy, and didnt do the trick, well after he was doing the retail dash, it gave him an error, and he said the console worked normally and the games worked normally on the 13604, he then attempted flashing through xell, dont know what he did in multibulider, but ended in rrod, and coolrunner not blinking at all with xell or freeboot

thats where im stuck right now

and after i installed the retail nand, read the nand again, found a few differnces between it and the original one i dumped, and the ldv level was the same

 

[thebomber]

just now i read the nand with nand healer and made a glitch image booted to xell but a black screen, never did that again actually, anyway i guess its the wires will desolder everything tommorow and resolder from the scratch,cause one time its not blinking, the other the green blinks very rapidly and low brightness,

 

[JohnsonMighty]

I have to switch to HDTV settings to boot Xell, so try that I guess.
But FreeBoot will only boot in standard TV settings on the cable.

And when I wrote stock to a console and the compared reread stock to the original dumps it had 5 differences.

 

[coolshrimp]

try running the erase cmd
the reflash original nand,

 

[thebomber]

Im going to renove everything now and install fresh lets seee how it goes

 

[thebomber]

fixed it guys removed all the wiring and made a clean install as if its the first time , and xell booted counted the ff's they stayed the same, installed freeboot everything great, one thing when i was installing with xell, it told me bad blocks, they were excatly 10, they are near the end of the 64mb nand i read, and console booted fine, no issues, wrote it like 3 times to make sure, but same i guess they are faulty blocks