Weird E82 on Corona V5 after CR4 and DemoN but boots xell?

[The Result]

• 
  Console Type: Corona V5
• Programmer Used: JRP v2.0
• NAND Size: 16
• Dashboard version: 16547
• CB Version: 13182
• Screenshot of NAND details from J-Runner:http://gyazo.com/f14982e3f73b5166efa05a4a0141e1aa
• Detailed Description of the Problem: Well this console used to have a CR3 Pro and DemoN in it and I could not get good glitch times out of it so it has sat and waited till the CR4 and I got around to it and I finally did. This console had been tested prior to CR4 DemoN booted stock nand and the DemoN nand properly so I did not mess with the DemoN at all in this install I just installed the CR4 and wrote the new xell image, After doing that tested the DemoN side only and BOOM! first glitch I have xell so I take it back to build the XeBuild image and I did so then proceeded to flash it to the DemoN nand. After doing so I went back to try and boot to dash and the CR4 just sits glitchs then I get E82 so I shut it down switched nands to retail and also E82 I was confused because this didn't happen before so I am unsure what I did. Xell still boots though the DemoN will not boot retail or DemoN nand without E82.
• Was the console working before you started: Yes
• Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Yes

​

Any help will be greatly appreciated considering this was going to be my personal console because I have not had one in awhile and had some great plans for this one.

P.S. I used the alternate DB2G3 point because I had a sonus installed and I placed the DB2G3 wire over it long story short moved the sonus and ripped the pad off.

 

[chase]

you may need a GPU relow

have you tried flashing stock nand to see if that works.. if so, put a game in and play around for a bit to see if anything happens

 

[warbeast]

could be southbridge remove hdd and see if it boots freeboot
i have a old trinty the same xell works freeboot shows e68 due to sb fault after a reflow it was ok for a year but now reflow wont fix it so its used without hdd just usb memory card

 

[nofeloniesyet]

e82 on slims is equivelant to e74 on phats.usually knackered gpu,but it dont take much to boot xell so xell still boots.

 

[The Result]

e82 on slims is equivelant to e74 on phats.usually knackered gpu,but it dont take much to boot xell so xell still boots.

Damn! Well I don't know what happened I only took off the XCLAMP and replaced thermal compound. Never really did anything at all with the GPU. It also had worked fine before maybe somehow it just happened in a very short time frame. I have been looking to invest in a reball machine but have not got around to it. Any of you guys willing to reflow this for cheap that is maybe around the Ohio area? Or anybody in general that will do it for cheap?

- - - Updated - - -

You guys think if I put it through eater you think it would give us a little more details? If it is possibly something with the install?

 

[nofeloniesyet]

Damn! Well I don't know what happened I only took off the XCLAMP and replaced thermal compound. Never really did anything at all with the GPU. It also had worked fine before maybe somehow it just happened in a very short time frame. I have been looking to invest in a reball machine but have not got around to it. Any of you guys willing to reflow this for cheap that is maybe around the Ohio area? Or anybody in general that will do it for cheap?

- - - Updated - - -

You guys think if I put it through eater you think it would give us a little more details? If it is possibly something with the install?

if its a true e82,reflowing wont help for long if at all.e82 usually needs replaced full stop,and on slims cpu and gpu are in one chip,and cpu is not interchangeable straight out.

 

[ultimate360]

You could get the xcgpu swapped, you need a donor board to pull the xcgpu and nand image from. Then move both to yours. That's the only way to fix it

 

[nofeloniesyet]

You could get the xcgpu swapped, you need a donor board to pull the xcgpu and nand image from. Then move both to yours. That's the only way to fix it

yup,and cost wise prolly not even worth it these days,just get another console.