LITEON DG-16D2S Weird Intro freeze

NuBLoZ

NuBLoZ

Senior Member
Feb 24, 2011
135
0
Florida
Okay so I just recently flashed back to stock firmware for the Beta Dashboard update and all went well.
Then I decided to flash back to LT+3.0 after the update and I hit liteon erase and I didn't get the MF ID or Device ID so I tried liteon erase again hoping to have them show up, but nothing except freezing. And now every time I turn on the power of my CK3i or CK3 Pro (I tried both) my computer freezes.

I'm sure I've made a bonehead mistake, just could anyone shed some information on what to do?

And if I'm missing any information just ask. Please and thank you!

Here's the log.
HTML: 
Sending Lite-On-Erase request to port 0xEC00

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a



Sending Lite-On-Erase request to port 0xEC00

..............

Drive returned Status 0x7F

.

Device Intro failed!



Sending Lite-On-Erase request to port 0xEC00

..............

Drive returned Status 0x0

....................

Device Intro failed!



Sending Lite-On-Erase request to port 0xEC00

..............

Drive returned Status 0x7F

....................

Device Intro failed!
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
When a Lite-On erase fails, I usually run Intro/Device ID which - in most circumstances - will successfully kick the drive into Vendor mode (0x72).

Are you using a VIA PCI SATA card or on-board SATA?
 
Last edited:
NuBLoZ

NuBLoZ

Senior Member
Feb 24, 2011
135
0
Florida
BL4K3Y said:
When a Lite-On erase fails, I usually run Intro/Device ID which - in most circumstances - will successfully kick the drive into Vendor mode (0x72).

Are you using a VIA PCI SATA card or on-board SATA?
Click to expand...
Thanks for the quick reply. I'm using on-board SATA.
And I can't just run Intro/Device ID because if the power is on for my CK#i or CK3 Pro my computer freezes for some reason.
 
Last edited:
frayed

frayed

DINDU NUFFIN
VIP Member
Dec 22, 2010
3,245
118
A galaxy far far away....


Xecuter's X360USB PRO is the world's first SATA to USB Mass-Storage controller that not only enables WINAPI over USB, but also PORTIO. This powerful all-in-one converter can be used with any software or hardware that uses these signals to work. Designed by Team Xecuter in conjunction with the experts at Team Jungle, the X360USB PRO adapter is the most advanced WINAPI/PORTIO to USB adapter ever created. One stand out feature is that you are now able to connect all Xbox 360 DVD drives to any PC or Laptop for the first time simply by connecting to a USB port.
No more struggling with specific SATA chipsets or issues with awkward operating system setups!
Now tasks such as repairing your Xbox 360 DVD drives firmware or upgrading your broken DVD drive to a new one without the expensive fees charged by the manufacture just got easier than ever before. Whether you are a beginner or advanced user, this multi-use Mass-Storage controller is an essential addition to any toolkit.
Click to expand...
ONLY $49.95 @ XCONSOLES

just sayin.....
 
Last edited:
  • Like
Reactions: Justice1231
Dicko316

Dicko316

VIP Member
Dec 13, 2010
794
68
North East/UK
It's probably just a driver issue, reinstall the sata drivers.

Or try doing a system restore to a time/point you know it worked.
 
IronMan72

IronMan72

VIP Member
May 13, 2004
210
33
USA
The solutions for this problem have been posted so many times that it doesn't require an individual response.

Sent from my DROID RAZR using Tapatalk 2
 
PeteZR1

PeteZR1

VIP Member
Dec 4, 2011
297
33
Spain
Call me old-school man, but flashing drives in my opinion is much simpler using dosflash and a bootable pendrive instead of JungleFlasher.

I've had terrible experiences flashing LiteON's with JF, some of them breath-taking so my advice is clear: JF is fine for producing LT fw's and reading keys in LiteON's and Hitachi's but for the rest... dosflash16 rocks!!!
 
You must log in or register to reply here.