Weird problem after installing X3...

_-MrNet-_

Noob Account
Dec 6, 2004
3
0
Montreal, Qc
I have install the X3 mod chip, and after this, the xbox open, but the tv screen stay black ... I remove the modchip, to boot with normal mode, and i see the first animation... But before to see the microsoft label, he tell me that i have a technical problem ... With the code 06 in the left corner. So now i dont know what to do ... Anybody can help me !?
 

Redneck

VIP Member
Oct 29, 2004
266
0
US
www.modderplanet.com
yup, should have left the chip in, it was working jsut fine, on new xbox's the cromwell screen is black, so you have to navigate it blindly which is very easy, but it looks like in removing your chip you f**ked up your xbox. Like i said, should have posted B4 taking the chip out.
 

aloo

VIP Member
Oct 14, 2004
179
0
UK
the 06 msg is your hd is unlocked.
 

crusher

Junior Member
Feb 27, 2003
10
0
You have a version 1.6b xbox nothing is wrong, the same thing happened to me. Keep trying to boot into backup mode. Power and eject at the same time. I would actually press power and then eject quickly after. Sometimes it took quite a few reboots to get any video to show up. I also had to flash it a couple times before it took.

there is a problem if your modchip has flash bios 3.0 /3.01 and you have a 1.6b xbox. Does your ram say Hynix on it thats a 1.6b

Error 6 = Cannot unlock HD

here are the error codes

http://www.xbox-scene.com/articles/errorcodes.php
 

freakit

Junior Member
May 4, 2003
12
0
I have a 1.6 and I am having a blank screen issue too. The bank selector board is lit up blue and I can see a blue light shining out of my crystal case coming from the chip. The eject lights are fine no frag. But the screen is black.

I tried to connect using the HTTP guide, but it didn't see my xbox. Am I going to have to burn a dvdr with my bios on it and flash blindly, or is there another option?
 

phoenixuk

Full Member
Dec 8, 2004
31
0
UK
thats exactly my problem .... is there a definitive solution to this, i can see this being a big issue as all of the older 3.0.0 x3's get shipped out to 1.6b 's !!! Please help us !!

D:)
 

liny515

Junior Member
Dec 12, 2003
16
0
Using an xbox banned back in october to play Red dead backup

Ok well its been sitting in my closet for about 7 months and my new xbox RRD just as Red dead came out.

anyway. when i try to play my backup it just goes to launch dvd then xbox logo.

now ive heard this is because i need to update something?

does the game need an xbox update to work?

Im not sure exactly what to do, and it is a tricky subject to search for.

any help would be very useful.

P.S i had 1.6 frameware or something. idk its been so long. but it was the latest back in october.
 

strucdown

Console Master
Nov 16, 2003
1,088
0
Re: Using an xbox banned back in october to play Red dead ba

first off the drive will need the fw updated then just put the back up of red dead redemption in it will prompt you for a console update then just update from the disk.
 

ir6ub9

Console Master
Nov 17, 2003
1,457
0
Re: Using an xbox banned back in october to play Red dead ba

you need to flash the drive up to the latest firmware
 

liny515

Junior Member
Dec 12, 2003
16
0
Re: Using an xbox banned back in october to play Red dead ba

ok thanks. thats exactly what i wanted to make sure off.

thanks for the fast replys