Weird problem when I reboot to dash.

[brandonchatham]

I installed a x3 on my 1.0 and flashed the BIOS fine, and I booted the machine and the X3 BIOS screen comes up fine and I can edit it and so forth. But the problem occurs when I reboot to Dash. When I reboot to dash it literally reboots the machine and takes me back to the x3 screen.

So I thought it was a bad flash, so I installed a working 2.6 chip and flashed that, and it booted up fine and even showed the icon in the corner when its booting, but then after the microsoft logo comes on at the bottom of the X screen it reboots and does the same thing over again.

I checked my connections and LPC soders and they seem fine.

Please let me know

P.S. I flashed the x3 with x3_1959. and the 2.6 with x2_4983

 

[Dinh]

Theres an option called Auto boot to X3 bios or somehting like that in the options. Just disable the option

 

[brandonchatham]

That didnt work.

Any other ideas what it might be?

 

[Dinh]

Did you rename your dadhboard files right?

 

[brandonchatham]

yes.... I cant even you slayers auto installer that I use for all my machines.. it just reboots.

 

[t0il3t]

What Is The Max Forward Voltage For Smd Leds In A Controller

I got some of these Purple LEDs but the controller would not light them, I tested them with a multimeter so I know the LEDs are good so instead I put in some amber LEDs, and I know I have used these blue LEDs before they both have close forward voltages does anyone know what the maximum forward voltage I can use is?

Wireless controllers are the ones I am interested in.