What Am i doing wrong ?

[Summo]

Some one please help ??????
i am using J-runner

I have a Trinity Slim.
I have downloaded the nand (4x) all matching 16.5Mb file
I have programes the cool runner V3
i have make the ecc
have flashed the ecc to the nand
have plug the xbox into the tv
and i get nothing on the screen when i press the ejecy button
the power button is flashing yellow (this is prob because there is no dvd rom i thing)
when i flash the saved nand back in the xbox boots up normaly with the power button flashing ( when i plug dvd in it stops flashing)...

im reading the nand with a jr programer.

do i have to have the cool runner in program mode or normal
i have tryed both ways on the cool runner switch and nothing. when i have cool runner in normal (or on) mode the 2 light come on and the green light dose flash.....

 

[ObeyNation]

http://team-xecuter.com/forums/showthread.php?t=96580 please fill in this template also post pictures of your install as well as jrunner log..

 

[chase]

complete the template like obey said

keep the coolrunner on NORM .. you should be getting the flashing green light..

 

[Summo]

TX Product(s) used: J-R Programmer, cool runner v3
Console Type: Trinity
NAND size: 16
Dashboard version: 2.0.16747.0
CB version: 9231
Screenshot of NAND details from J-Runner: YES
J-Runner log: below
Image of Cool runner: yes
Images of close-up soldering to motherboard: yes

Description of problem:

Plug the Xbox in to the TV (HDMI)
press the eject button ......
and nothing. The power button is flashing. If I switch off and plug the DVD rom back in that stops flashing.
And I get nothing on the screen when I press the eject button.
If I flash the nand with the save nanddump and power up everything is back to normal.


was the console working before you started: Yes
here is the LOG

===================================================
18 May 2014 23:01:02

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to D:\xbox360\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 3:24 min:sec

Reading Nand to D:\xbox360\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:24 min:sec
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Comparing...
Nands are the same
Programming Coolrunner
D:\xbox360\J-Runner\common\xsvf\trinity.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: D:\xbox360\J-Runner\common\xsvf\trinity.xsvf
Sending Out Packets .........
Success
ECC created
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:21 min:sec

 

[BL4K3Y]

Remove the JP resistor from your CoolRunner.

The phat glitch circuit won't work properly on a slim motherboard if C15 is enabled.

You should also make sure that the NOR/PRG switch is set to NOR.

 

[Summo]

do i remove c15 or is there a solder jumper like the jp pad

 

[BL4K3Y]

do i remove c15 or is there a solder jumper like the jp pad

Remove the "0" resistor to disable C15.