I do not know where my problem is. I updated my XBox 360 to the 2.0.13599.0 system update then I found out about Team Xecuter and bought the X360USB PRO, CK3 PRO, CK3 PROBE 3, and HDD ADAPTER. I used these (without the HDD Adapter) to flash my Lite-On 74850 drive for the first time to iXteme LT+ 1.91. It did not work, I do not know why (part of the problem). I used the http://www.team-xecuter.com/forums/showthread.php?t=61803 guide and the DVD key was verified with no problems. I then re-flashed using this tutorial: http://www.team-xecuter.com/forums/showthread.php?t=66257. On both I used Windows 7 Ultimate 64-Bit with Disable Driver Signature Enforcement start-up. When I try to play a regular 360 game and a backup game, it reads as a DVD and shows this image: http://img208.imageshack.us/img208/9277/dscf1275g.jpg. So now my 360 does not read games and I do not know what to do.
LITEON 74850 What Am I Doing Wrong?
- Thread starter polaris4
- Start date
I am sorry, I did not save either of them and worse of all I deleted the Dummy.bin files. I do not believe I spoofed anything unless it was in the tutorial.
hmm if you've deleted your dummy.bin files you might be in a bit of trouble then.. you have to spoof your key to LT 1.91 firmware or you end up with a dvd player
at step 5 did you autoload ?
jf should have your key in its database , so you might be ok
at step 5 did you autoload ?
jf should have your key in its database , so you might be ok
Last edited:
shouldn't be all 7's sounds like you put the firmware's round the wrong way
dummy.binl (with your key)goes in the top box, lt 1.91 goes in the bottom box
Last edited:
x360ccm
BANNED
redump your drive and post your jf log mate.also check your recycle bin for your dummy.bin
your surpose to keep that safe.
your surpose to keep that safe.
think he's already flashed it .. will have to check the key database (if it's not in his recycle bin)
x360ccm
BANNED
well check your key database like what Frazzled said, in JF
connect your drive up again, open JF, go to dvdkey32 tab, click dummy from JF database
connect your drive up again, open JF, go to dvdkey32 tab, click dummy from JF database
Last edited:
1 N/A 77777777777777777777777777777777 Lite-On DG-16D2S 83850Cv2
That is all in the Key DB.
---------- Post added at 02:28 ---------- Previous post was at 02:26 ----------
I found another instance of JF and a key that is my original in the Key DB.
That is all in the Key DB.
---------- Post added at 02:28 ---------- Previous post was at 02:26 ----------
I found another instance of JF and a key that is my original in the Key DB.
ahh you are in a bit of trouble then, since you deleted your dummy.bin, you are stuck with a dvd player , unless someone else can help !!
unless you can do the glitch hack , or get someone to do it for you
hmm that's strange..try this with that version of JF then
connect your drive up again, open JF, go to dvdkey32 tab, click dummy from JF database
i'm not 100% sure if this would work but worth a try
if you can get your key make sure you save the dummy.bin
unless you can do the glitch hack , or get someone to do it for you
hmm that's strange..try this with that version of JF then
connect your drive up again, open JF, go to dvdkey32 tab, click dummy from JF database
i'm not 100% sure if this would work but worth a try
if you can get your key make sure you save the dummy.bin
Last edited:
did you do this
connect your drive up again, open JF, go to dvdkey32 tab, click dummy from KeyDB
should be able to build a dummy.bin this way..i think !
connect your drive up again, open JF, go to dvdkey32 tab, click dummy from KeyDB
should be able to build a dummy.bin this way..i think !
Last edited: