LITEON 0225 What hw should i choose to unlock drive?

s4n3k

Noob Account
Apr 12, 2011
9
0
Hi,

i see that team xecuter have released many options in this area

SPUTNIK360 Probe - PCB Addon
SPUTNIK360 - Liteon DG-16D4S DVD Unlock Switch
SPUTNIK360 - Liteon DG-16D4S DVD Unlock Probe
Liteon DG-16D4S - Unlocked Replacement PCB
Others??

solder skills is not a problem
what should i take?

note: is not for me, a friend, but i will install it. So im searching for the best option.

Thanks
 

zpersi1995

VIP Member
Oct 4, 2011
243
0
Northeast US
if its a one time thing I recommend the SPUTNIK360 - Liteon DG-16D4S DVD Unlock Probe
if your doing it for many people I recommend the probe and getting around 15 addons.
 

jabramo

Senior Member
Jan 14, 2011
109
0
First you have to determine if you have a Windbond

if you dont have a Windbond your lucky

You can go with the sputnik options.

I like the sputnik switch rather the probe and the add on pcb but it comes does down to personal preference as they do the same thing.

If you have a Windbond then you will have to go with a TX replacement board or you can have a go at the Kamikaze hack.
 

s4n3k

Noob Account
Apr 12, 2011
9
0
the addons a bit that you fit to each drive ie you have one drive get one addon if you have five drives get five addons
still not understand what is a addons or what the objective, my english is not so good...
can you try explain in other way?

thanks

First you have to determine if you have a Windbond

if you dont have a Windbond your lucky

You can go with the sputnik options.

I like the sputnik switch rather the probe and the add on pcb but it comes does down to personal preference as they do the same thing.

If you have a Windbond then you will have to go with a TX replacement board or you can have a go at the Kamikaze hack.
Hi,

so Windbond must be replaced? any of sputnik hw will not work?
Correct me if im wrong: windbond must be replaced so try kamikaze hack? in failure pcb will not work anymore so buy a replacement. is that right?
 

jabramo

Senior Member
Jan 14, 2011
109
0
Correct sputnik will not work with Windbond.

You don't need to replace anything with a kamikaze you just drill the windbond chip. What a lot of people do is read the key and try the kamikaze if it doesn't work they just go ahead and buy the replacement board and flash it with the key spoofed.
 

s4n3k

Noob Account
Apr 12, 2011
9
0
Correct sputnik will not work with Windbond.

You don't need to replace anything with a kamikaze you just drill the windbond chip. What a lot of people do is read the key and try the kamikaze if it doesn't work they just go ahead and buy the replacement board and flash it with the key spoofed.
Thanks, i will check the driver chip latter and come with a anwser.
 

s4n3k

Noob Account
Apr 12, 2011
9
0
ok i notice now addon is the piece of hardware lol.
my fault....

drive is a 05x

means windbond, right?

so options here are limited