What I really need?

madcitysw

Full Member
Jul 24, 2003
30
0
I have looked around all day trying to determine what I need to mod my slim xbox 360 (Trinity with dash 16547), but with all these mod boards I left confused. I used to mod my xboxes back in old days, but now things has changed alot since then.

I been looking into the dual nand demon mod, but left confuse what I need and what the differents are. I found everything at modsuppliers which I hope they are not fakes.

Xecuter Demon Slim 360 Dual Nand
Xecuter CoolRunner Rev C
Xecuter J-R Programmer v2

I not really sure if I need all these to make it work. I understand I need a programmer to program the demon, but am I required to have the coolrunner too?

Sorry if it seems to be a newbie question, but it has been a long time since I modded anything.
 

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
The DemoN and CR Rev. C are fine for a Trinity dual NAND install.

You don't need a JRP V2 because you can use the DemoN to read/write to the NAND and it can also be used to program the CoolRunner.
 

madcitysw

Full Member
Jul 24, 2003
30
0
Thanks BL4K3Y,

So basically the CR Rev C is what tricks the XBOX 360 into loading a custom firmware and the DemoN is what holds the two firmwares and programs it, in this case the stock firmware and a custom firmware correct. Just trying to get a better understanding and can modsuppier be trusted with real products?

The DemoN and CR Rev. C are fine for a Trinity dual NAND install.

You don't need a JRP V2 because you can use the DemoN to read/write to the NAND and it can also be used to program the CoolRunner.