What is the resistance over the bypass caps(SX Core V2).

[fach1fach]

Hi,

I get 11 Ohms over the bypass caps after soldering. Sadly I didn't check the resistance before. Seems to low or am I wrong.
If it is I would think I killed a cap, if so what caps are used, are they all the same?

Thanks for helping.

Paul
Forgot to mention, SX Core v2. Sorry.

 

[Grimlock97]

Did you lose your caps after trying to solder or want to find out, if you have got well soldering joint with good connection?
Did you try if your switch boots?

 

[fach1fach]

No all caps are there and my connections seem to be fine. I was only thinking that 11 ohms over a cap is nearly a short and I didn't turn it on because I am afraid to damage the switch. The row of caps on the right of the cpu has over 1kohm over there caps. But I have no idea, maybe it is fine. Do you know if it would damage the switch if one cap was broken and internally shorted?

 

[Grimlock97]

I didnt test my caps with multimeter as I had magnifying glass to verify that my soldering joint is well soldered. There are people telling that they get 20ohms or some say 15 ohms. I think its fine. Just test it.

 

[fach1fach]

Sounds good I will test it. Thank you!

 

[Grimlock97]

Should work. Share your experience with us please.

 

[fach1fach]

Yes everything is fine, thanks again!
My multi-meter is not the best, and crappy at low resistance, so somewhere in around 10 to 20 ohms seems to be right.