RGH What mobo do i have?

[SimonSez]

I"ve red alot, but i'm stuck.
Please see pics.
PSU 10.83a = trinity
Hynix nand = Corona
mfr date 2012-9-14, drive is 16d5s on 1175 and i need to extract the key!

I'm not sure if solder points are any different between the trinity and corona v1, but i need to be sure. I would say install the coolrunner as a corona v1. Please acknowledge my findings.

 

[john mathews]

corona v1 http://team-xecuter.com/xecuter-official-corona-motherboard-identification-solutions/

 

[SimonSez]

Thx, i know the pics. The slim case could be changed, but the 10.83 A doesn't make any sense. The Nand says i'm a corona v1.

 

[BrockThunderjam]

Easiest way to know is if there is a HANA chip or not (which your picture does not show). Your picture of the mobo sucks.

 

[SimonSez]

Yeah, the flash is the issue. But thanks, any way i can measure psu amperage?

 

[BrockThunderjam]

Why would you want to do that? Just look to see if you have a HANA or not if you're unsure.

 

[SimonSez]

The pic says hynix, read first post pls.

 

[BrockThunderjam]

The pic says hynix, read first post pls.

You're clearly not understanding what I am telling you. The NAND and the HANA are two separate chips. If you have a HANA, you have a trinity. If you dont, it's a Corona.

 

[SimonSez]

You clearly can't read, my pic, the one with the flash, says its a hynix so a corona yeah.
Please read first post, your comments are pretty much useless, are you all noobs.
Read my post and it'll telt you that i already know what nand i have, it just doesn't match the psu.
Read above the first pic and you see what i'm asking for.
I appreciate the help but i think this is to difficult for the noob section, i'm sorry. Its just tyering.

 

[Antalpromille]

It has the memory unit port next to the nand, it means its a Trinity.

John, if you don't know the answer don't answer!

 

[Antalpromille]

You clearly can't read, my pic, the one with the flash, says its a hynix so a corona yeah.
Please read first post, your comments are pretty much useless, are you all noobs.
Read my post and it'll telt you that i already know what nand i have, it just doesn't match the psu.
Read above the first pic and you see what i'm asking for.
I appreciate the help but i think this is to difficult for the noob section, i'm sorry. Its just tyering.

Hynix nands have been used on all 16mb consoles, just a few ones had other brands, does that mean all phats are corona V1 also? Don't call people noobs when you're the noob!

 

[john mathews]

It has the memory unit port next to the nand, it means its a Trinity.

John, if you don't know the answer don't answer!

look at his mfd its not a trinity it has a 16d5s drive no trinity has that drive with mfd or he need to post a clear shot of mb

 

[Antalpromille]

look at his mfd its not a trinity it has a 16d5s drive no trinity has that drive with mfd or he need to post a clear shot of mb

It has the header for the 4th memory module, only trinitys have that. you can also tell that the SB is closer to the nand on trinity but I guess you already knew this Mr. Smartass? It's probably a refurbished console sold with hard drive. If you say anything else, you're just stupid!

No clearer picture is needed.

 

[john mathews]

It has the header for the 4th memory module, only trinitys have that. you can also tell that the SB is closer to the nand on trinity but I guess you already knew this Mr. Smartass? It's probably a refurbished console sold with hard drive. If you say anything else, you're just stupid!

No clearer picture is needed.

excuse me he was told already if he had hana its a trinity he said he doesnt know so im going off of mfd date and drive model u need to read and the op need glasses

 

[BrockThunderjam]

You clearly can't read, my pic, the one with the flash, says its a hynix so a corona yeah.
Please read first post, your comments are pretty much useless, are you all noobs.
Read my post and it'll telt you that i already know what nand i have, it just doesn't match the psu.
Read above the first pic and you see what i'm asking for.
I appreciate the help but i think this is to difficult for the noob section, i'm sorry. Its just tyering.

Stickers on the case mean jack sh*t. Just because you read 10.83 A doesnt mean anything. I was trying to be helpful to you and tell you an easy way to tell, but you are just being a ****, so f**k off.

And please learn how to spell, you are making yourself look like more of an idiot than you already are.

 

[Antalpromille]

excuse me he was told already if he had hana its a trinity he said he doesnt know so im going off of mfd date and drive model u need to read and the op need glasses

You need to learn what to look for, and whats most important to identify motherboards. So what is most important, MFR dates or the actual PCB design?
I suggest you just read for a while Untill you know enough to actually help.

 

[john mathews]

You need to learn what to look for, and whats most important to identify motherboards. So what is most important, MFR dates or the actual PCB design?
I suggest you just read for a while Untill you know enough to actually help.

i know the difference op doesnt u have sir a good day

 

[Antalpromille]

i know the difference op doesnt u have sir a good day

Of course you do since you said his trinity was a corona V1. A good day to you too.

 

[SimonSez]

OK guys, i probably ow you an apoligy.
The corona identification page shows à pic of the nand from corona v1.
since i have made à pic of that specific nand, i assume its à corona v1.
I will take further look for the Hana chip.
if i find it or not i owe you an apoligy
sorry, i am noob indeed!

 

[Antalpromille]

OK guys, i probably ow you an apoligy.
The corona identification page shows à pic of the nand from corona v1.
since i have made à pic of that specific nand, i assume its à corona v1.
I will take further look for the Hana chip.
if i find it or not i owe you an apoligy
sorry, i am noob indeed!

apologies accepted. You don't need to investigate further, you motherboard have the 6-pin J1D1 header, only trinity have that. Corona have a 5-pin thru hole J1D1 header.