what to do with my bios from xbins
- Thread starter lundman53
- Start date
adam.giles
VIP Member
You can ftp it into the back-up folder on the chip, or you can do it through X3CL.
Once it's done you know you'll always be able reflash your chip if anything goes wrong.
Once it's done you know you'll always be able reflash your chip if anything goes wrong.
adam.giles
VIP Member
lundman53 said:X3cl????????? Is there a Tut or guide for all that?
http://x3.bustedchain.com/index.html
b0y
Full Member
dont need to have switch set anyway if you flash your backup bank (power eject at sametime) just ftp the flashbios 3.0.3 to a folder named bios (that you will have to make in C:/ folder)as well as the x3 bios for later use not need to just yet but handy to have on hard drive of xbox then reboot to x3config do the flash backup rom option pick hard drive flash then look for flashbios 3.0.3 then flash it that easy
make it on your PC then put flashbios 3.0.3 in it as well as x3 3294 bios
x3 3294 for v1.0 to v1.5 xboxs
x3 3294 v16 plus for v1.6 v1.6b xboxs
may need x3 bios at a later date just handy to have on xbox hard drive
then ftp the bios folder over to your xbox C:\ folder
x3 3294 for v1.0 to v1.5 xboxs
x3 3294 v16 plus for v1.6 v1.6b xboxs
may need x3 bios at a later date just handy to have on xbox hard drive
then ftp the bios folder over to your xbox C:\ folder
this is what your trying to fix???
once you have bios folder with flashbios in xbox H/D boot to x3config then goto bios tools option pick flash backup rom
then flash from hard drive
then find bios folder
then flashbios
then flash
then turn off xbox after flash has finshed
then try power eject you should have a working backup bank
once you have bios folder with flashbios in xbox H/D boot to x3config then goto bios tools option pick flash backup rom
then flash from hard drive
then find bios folder
then flashbios
then flash
then turn off xbox after flash has finshed
then try power eject you should have a working backup bank
read on how too network xbox
you will need a crossover len cable or a routor with a len cable(not crossover) to network to xbox
boot into x3 config
settings
static ip put 192.168.1.2
now reboot xbox back into x3config
now you can ftp to your xbox dont need a boot dvd or a dash
or install a dash useing AID3 or slayer whitch will allso let you ftp to your xbox
you will need a crossover len cable or a routor with a len cable(not crossover) to network to xbox
boot into x3 config
settings
static ip put 192.168.1.2
now reboot xbox back into x3config
now you can ftp to your xbox dont need a boot dvd or a dash
or install a dash useing AID3 or slayer whitch will allso let you ftp to your xbox
You don't need a dashboard to FTP if you have an X3 chip flashed with X3 Config Live. It has a built-in FTP server as well. Don't read guides that were written 2-3 years ago. There are much simplier ways to do things now and different ways depending on your hardware.
Don't worry about ports, it will know it already.
Default FTP port is 21. You don't even need to assign it since it is default and already assumed using a FTP client.
Don't worry about ports, it will know it already.
Default FTP port is 21. You don't even need to assign it since it is default and already assumed using a FTP client.
Thanks for all you help, Just one more question and then i should be done bugging you guys. How do i boot to my backup bios, is my chip read to have a dashboard installed and does xecuter make a dash. Can you install a dash without using a disc. Thanks For EVERYTHING!!!!
Last edited: