I just bought a Slim, 4GB NTSC, Lot number 1131x, Manufacturing Date is 7/28/2011. It uses a 9.6 power supply, but from what I've seen, many people have said the 1131x lot numbers are mostly trinity boards. Were Corona's in mixed in with this lot number? I'm pretty sure my dvd drive is flashable, but I want to RGH this thing, and I don't have the tool to open it, plus I don't want to fat finger it and scratch it up lol.
oO Elite Oo
VIP Member
9.6v is not Trinity, Theirs no HANNA chip on board so in other words your drive is 1175 lite On and a solution to this is currently being looked at. If you dont want to open it then i suggest you get your console done by a modder, simple as that.
Here's why I'm asking. Getting conflicting reports:
http://www.xecuter.com/forums/printthread.php?t=63164&pp=40&page=14
If you search the page for 1131x, you'll see that everyone has a flashable drive, but it looks like not all boards are Trinity.
http://www.xecuter.com/forums/printthread.php?t=63164&pp=40&page=14
If you search the page for 1131x, you'll see that everyone has a flashable drive, but it looks like not all boards are Trinity.
I have heard about this too. On the back on the XBOX near the AV/HDMI port it will say 12v = 10.83a or 9.6a, which does yours say?
oO Elite Oo
VIP Member
Then i suggest you follow Martin C guide, pop of the side grill and look inside to find the on board HANNA Chip...Good Luck 
Good call, forgot about that guideThen i suggest you follow Martin C guide, pop of the side grill and look inside to find the on board HANNA Chip...Good Luck
[email protected]!!!! Wooo! IT says 10.83A!!! Right ON! Weird that they gave me the 9.6 pw supply though, but hell, i'm gonna look for the hana now. Thanks guys!!
Sure thing, the 12v = 10.83 is probably the best way to check what board is in it. However I think I remember reading something about some early Coronas coming with the 135w PSU and saying 12v = 10.83. I have seen late 2011 model Trinity's as well, including some from the Black Friday deals.
If it is a Trinity on pre-14717 you should RGH now while you can, even if just to get the CPU Key.
If it is a Trinity on pre-14717 you should RGH now while you can, even if just to get the CPU Key.
rdubbs007
VIP Member
If it says 10.83A on the back of the console where the serial number info is, it is a Trinity
Not exactly and don't hold me to this but I remember reading somewhere that some early Corona's shipped with 135w PSU and 10.83 on the back sticker just like Trinity but were actually Corona's.If it says 10.83A on the back of the console where the serial number info is, it is a Trinity
I would say with a mid 2011 manu date and 10.83 that it highly unlikely that it is a Corona.
rdubbs007
VIP Member
I believe they were talking about it saying 10.83 on the power brick itself:
(Click and zoom)
(Click and zoom)
Yeah I knew there was something about the amps listed, the power brick, and the early Corona's. Thanks for the info.
Yeah, it's weird, my brick says 9.6, back of the unit says 10.3A though. MS' really got things mixed up this time it seems. Either that, or they're really trying to throw us off. Probably the latter though.
Ive had many with the same, 9,6 brick. 10.83 console. i think its either the consoles only ever needed 9.6, or like you said ms messed up
M$ has goofed, I have a stock trinity with a 2020 manufacture date. The sticker says 6-18 -2010 and the nand says 6-20-2020
Martin C
VIP Member
Best way as mentioned is to look for the HANA chip. It's why I went to the trouble of writing a post on it
Ok, well, good news! It looks like my 360 with a lot number of 1131x turned out to be a Trinity, even when it was bundled with the Corona power cable. Friend of mine RGH'd it for me earlier today, works perfectly!
Just had a question about the Liteon DG-1645S Drives. Mine has one. I know we can kamikaze those, unlock them, etc. However, is there a way to write cfw to those drives yet? ( I thought I remember reading that those were flashable) If they're not flashable, I guess I'll have to go replacement pcb. Meh.
Just had a question about the Liteon DG-1645S Drives. Mine has one. I know we can kamikaze those, unlock them, etc. However, is there a way to write cfw to those drives yet? ( I thought I remember reading that those were flashable) If they're not flashable, I guess I'll have to go replacement pcb. Meh.
Martin C
VIP Member