Whats next after J-runner

R

randyx

Junior Member
Dec 4, 2011
13
0
What to do after you do the last step in J-runner?
I know there are a lot of guides on all this, but its not clear how much of the "next steps" have already been done by J-runner.


I know there is a similar post in the J-runner area, but I can't post there.
"
Here is what was responded there....
**************
Re: What need to be done after the last phase.
Install and configure DashLaunch 2.32 if you haven't done so already, then you can proceed to configure FSD to your liking.
*************


I think I have everything working, it does everything I ask it to, but I have these questions:

1.
I checked Dashlaunch patches and edited the launch.ini, didn't this do the above step saying install and configure dash launch?

2.
I found a FSD.zip file and extracted it to the root of a USB device so I had a folder usb:\fsd\ and in it I also copied the launch.ini file i created to the root fo this device.
I have seen and read about FSD Installation disks, was there more to installing FSD that I missed, or did J-runner already do this for me.

2B.
Are the settings in Launch.ini were installed when the Nand was created and written during the final steps in J-runner? or are they only read in from the launch.ini file on boot.

Is there a way to confirm what launch.ini settings are active from FSD? or XEX?

3.
Later I also added a line in the launch.ini for to boot XEXmenu while holding a specific button.
This also works, however I can't see any reason I would use this over FSD, Is there something I am missing or is XEX just a "older product"?
 
B

bobspamphlet

Full Member
Oct 13, 2004
29
0
BELFAST
I found this pdf, used the cd image burnt it and it auto installed.


PM'ed the external link, not sure if there allowed in threads.

---------- Post added at 20:54 ---------- Previous post was at 20:45 ----------

Balls wrong link, don't follow it - gimme five mins.
 
B

bobspamphlet

Full Member
Oct 13, 2004
29
0
BELFAST
TeamFSD.com front page download the iso version pop it in your xbox, run it, tick to download updates, install FSD and install and configure Dashlaunch.
 
  • Like
Reactions: JediJynx
R

randyx

Junior Member
Dec 4, 2011
13
0
bobspamphlet said:
TeamFSD.com front page download the iso version pop it in your xbox, run it, tick to download updates, install FSD and install and configure Dashlaunch.
Click to expand...
My re al question is Does this need to be done after j runner is the appears j runner already did this.
 
B

bobspamphlet

Full Member
Oct 13, 2004
29
0
BELFAST
Pretty sure jrunner only does something with Dashlaunch, and I think that is only create a launch.ini file (could very well be wrong, but thats all it seemed to do for me).

So if you haven't installed another dashboard you're still booting to M$ original dash.
 
R

randyx

Junior Member
Dec 4, 2011
13
0
If I put a fsd folder in my usb d rive it boots freestyle without doing anything after i write the band in jru nn er.

So somehow it installed Somthing
 
D

duffman452

Full Member
Apr 3, 2011
50
0
you can use the fsd installer to put fsd on any save device you want, check teamfsd.com for the installer and how to use it.
 
Last edited:
R

randyx

Junior Member
Dec 4, 2011
13
0
Ok since the general response was to run FSD installer, I did it.

It is not apparent to me that anything is different then when J-runner installed Dashlaunch and I copied a FSD folder and Launch.ini to the root.

Perhaps it does something else in the background.
 
You must log in or register to reply here.