ANSWERED Where does the black wire go ?

T

The Lorax

Senior Member
Sep 9, 2014
113
0
Finished Checking Files
You need an .ecc image
ECC created
Version: 01
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:29 min:sec

- - - Updated - - -

this happened after reading the nand.
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
ok press show working folder in jrunner and there should be 2 files that look like this
nanddump1.bin
and
nanddump2.bin if you don't have these don't write anything else to the console don't touch it.
 
T

The Lorax

Senior Member
Sep 9, 2014
113
0
When I said that I had the thought that I had fried something,It was my soldering or something else instead that caused it.I was so worried the whole day until I started reading this post again. :)
 
D

Dracothic

Full Member
Apr 7, 2005
27
0
London Ontario
Step one connect your xbox back to the Jrp and your computer and write nand dump1.bin back to your console

Step 2 remove everything you soldered to the board and do a visual inspection for any drops or splatters of solder

Step 3 test it

If it does not work post your jrunner log of the nand dumb.bin being writen to the system along with high resolution pics of both sides of the board

If it does work you have 2 options

1) take/send it to a pro
2) read the tutorials 3 times before trying again
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
you were supposed to read the nand 2 times. did you even read the jrunner pdf or any guide on how jrunner works? now with the way your soldering looks on the nand pin header we don't know if the 1 nanddump you have is even any good or not. but if i was you i would plug in the console and the jrp and load the nanddump.bin into the source box and flash it back to the console to see if it will still boot stock.

maybe you should look in your jrunner folder and find the jrunner.pdf and read it thoroughly all the way through until you understand how it works before you wind up writing a useless image to your nand and lose your original nand image...
 
Last edited:
T

The Lorax

Senior Member
Sep 9, 2014
113
0
Okay so I would hit load source, pick the .bin , hit write nand, and my xbox should work again ? Then what should i do? Solder the cr 4 ?
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
no make sure when you hit load source you pick nanddump1.bin then hit write nand then unhook your xbox and jrprogrammer then reconnect power and boot to stock and let us know if it boots
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
try to read up on the whole process please.. you really need to know what you are doing. you cant just read a sentence and do what it says you need to read the whole guide before you ever touch anything. seriously im surprised you haven't bricked your console yet with all the random questions you are asking and you should know all of this stuff before you ever bought the cr4xl or a jrp. you also need to backup your nanddump1.bin and save it somewhere for safekeeping. you have to read the nand twice before you ever write anything to it because jrunner needs to compare your 2 nanddumps against each other to make sure they match. but like i said first off write back stock nand (nanddump1.bin) to console and get it booting stock before anything else.
 
T

The Lorax

Senior Member
Sep 9, 2014
113
0
Arizona, United States. I have a cr4

- - - Updated - - -

So I would only pay for shipping and doing the install.
 
T

The Lorax

Senior Member
Sep 9, 2014
113
0
Okay I just finished reading the nand and soldered the cr4 to the motherboard.Am I missing a step ?

[video=youtube;Jw3a9HlqcAE]https://www.youtube.com/watch?v=Jw3a9HlqcAE&feature=youtu.be[/video]
 
T

The Lorax

Senior Member
Sep 9, 2014
113
0
Yes I know, scream in horror at my awful soldering...But if that is the problem then i will re solder it, again...
 
You must log in or register to reply here.