ANSWERED Which cfw should I have with 12413 dash & Liteon

[bugboy]

Hello folks.
Long time lurker that finally decided to get with the program.
I had a xenon with Liteon DG-16D2S 74850C stock fw on it. Decided to get a Kinect, ran the retail kinect adventures disc to now have dash version of 12413.
Backed up ofw of liteon and updated w/ cfw LTPlus-025v1.9.bin .

My question "which may be obvious" is did I use the wrong cfw (the LTPlus-025v1.9.bin) for this dashboard of 12413?
And if so, could I just reflash the stock 74850c ofw back to the drive, then update to latest dash?

Thanks for reading and any comments.

 

[whoseanthony]

Flash the drive to stock (post update phat liteon) then load it into JF and it will load the right CFW for you. TIP-place all CFWs in the firmware file.

 

[x360ccm]

load your dummy in source.

then you would load the orig-74850C-1a000 into target.

dont forget the spoof source to target.

then update your dash.

once you done that then use LTPlus-0251-v3.0

 

[bugboy]

Thanks both of you for the quick responses. Will give it a shot

 

[J2G]

LiteOn Post 13141 = 02510c
LiteOn Pre 13141 = 74850C

so your drive should be 74850C because your dash is 12413 not rocket science but if i was you now i would flash your drive back to stock 74850C then update to the latest dash 14699 and then flash your drive to LTPlus-0251-v3.0

 

[bugboy]

You guys are awesome. That helped me and my kids out alot. Only saw 6 post on 12413 and none addressed this. Thanks again the three of you.

 

[J2G]

np :smile: