BENQ which firmware is stock

[wkdsean]

i have a benq 64930c but it has lt plus firmware on it.

i have the drive key but not the origonal stock firmware so i downloaded a stock firmware package from ixtreme.

there are 4 different bin files which 1 is the correct 1 to put my drive back to stock?

1.orig-64930C-A030
2.orig-64930C-B030
3.orig-64930C-C030
4.orig-64930C-E030

 

[BL4K3Y]

Any of those firmwares should be fine however be sure to select the appropriate firmware from the PRE (before 13xxx dashboards) or POST (13xxx and newer dashboards) folders.

 

[wkdsean]

do i just load this into the target firmware bit on jf

 

[wyospartan117]

There is only one post 13xxx stock fw for all benq's as stated above. The different fw versions you listed are for pre 13xxx. The differences in them come from the key position in the firmware to my understanding and thus the -x030 suffix. You can determine the correct key position and thus stock fw by opening up a fw dump in jungle flasher as it states the key position there. I know this doesn't matter for liteon's, but it may for benq's. This why you should always keep a copy of your original fw especially as benq dumps are full dumps.

 

[wkdsean]

the dash is pre 13xxxx when i load 1 of them to target firmware it shows my drive key as all 000000000000000000000000's, do i just copy my dvd key and replace the 000000000's.

the drive already had lt plus firmware on it so i dont have the origonal dump.

 

[BL4K3Y]

Click Spoof Source to Target and it should copy your drive key over.

 

[wkdsean]

thanks alot mate.