I'm having the problem where jungle flasher freezes during the flashing of a lite-on drive phat. It basically begins writing to bank one and never stops. I've tried everything with this stupid via card (which I am told is the issue with the freezing). From dosflash16 (which freezes on the erasing part) to dual booting windows xp 32 bit I've tried pretty much every tutorial, tried every port on the via card, tried every driver (and lack of driver) and it always freezes on writing to bank one (letting it run for at least 10 minutes, which I'm told should take seconds. I'm hoping the card is just defective because the drive is properly loaded into jungle flasher and shows the flash chip properties after using lite-on erase and cycling the drive.
LITEON DG-16D2S will x360usb pro fix my issue?
- Thread starter apatheticalex
- Start date
vegaslightsss
VIP Member
Can you give Jf log? What version are you using? Have you actually booted into dos to try to flash your drive?
Can't give a log as I have to kill the process. Using latest version (v0.1.88 Beta (280). And yes I have booted into dos.
just wanted to let everyone know that the x360usb pro did fix my issue, definitely the way to go if you are having problems with liteon freezes
Can you tell me how you use x360USBpro to fix your drive? I have a Lite-on drive that is not recognizing in JF after JF froze during a flash.
I own the x360USBpro but can't seem to fix it. Any help would be appreciated.
?
BL4K3Y
VIP Member
Lite-On erase will bring that drive back to life, make sure you have your drive key/dummy.bin before running erase though!
I have attempted Lite-On erase probably 100 times and no luck.
Can you or anyone probably a step-by-step tutorial on how to repair this Lite-On drive? Thanks.
BL4K3Y
VIP Member
Thanks for the tutorial.
However... it didn't work. Tried it a number of times.
My status never changes. Always 0x80. I don't get the status "Drive returned Status 0xD0" as suggested in the tutorial.
Any other tutorial?
I have the same exact issue...my computer shut off during the flash, not I cannot get the drive to read again. I have done everything, including lite-on erase. I have flashed numerous drives, but cant figure this one out.
I have read some forums where people kept trying and one day it finally worked.
I have read some forums where people kept trying and one day it finally worked.
BL4K3Y
VIP Member
No but I'm familiar with DosFlash. Is it compatible with x360USB? Prior to purchasing x360usb, I did attempt with dosflash without any luck. I even tried iPrep..
Last edited:
BL4K3Y
VIP Member
Yes, I have attempted that route prior to purchasing x360usb. The reason why I purchased x360usb because it says it can repair brick drives.
I have attempted with this tutorial without any luck too but it looks promising: http://forums.360mods.net/showthread.php?32249-JF-Crashed-bricked-drive&
So, any other suggestions would be appreciate. :-/
This is a good video to show you how to unbrick your DVD Drive, it happend to me too, i thought my drive was totaly dead, but i got it back,
This with sort your drive out
[ame="http://www.youtube.com/watch?v=J-ceeSk5TpM"]Lite On Recovery - YouTube[/ame]
This with sort your drive out
[ame="http://www.youtube.com/watch?v=J-ceeSk5TpM"]Lite On Recovery - YouTube[/ame]