GENERAL Winbond no eject fix

Argentum

VIP Member
Dec 13, 2011
388
0
Khobar, Saudi Arabia
Windows Version : Vista 32 bit
Xbox DVD Version: Lite-On 0225
Tools: X360USB PRO v18, CK3i
Software: JF 1.9 beta

I did the kamikazi hack and stopped as soon as the beep blew into my ears. I was using a solder iron with the 3.3V 100 ohm contact.

However now my drive doesn't eject. I read some posts suggesting the POUT fix, however most of them mentioned that their drive keeps ejecting, but my case here it doesn't eject in the console or by using a CK3i.

and for the Pout fix is there a certain type of resistors I should use?
Any IDEAS ?!
 

Argentum

VIP Member
Dec 13, 2011
388
0
Khobar, Saudi Arabia
might be! what I want is the solution?
 

diaboliq20

VIP Member
Jun 23, 2011
3,497
0
Scotland
it's pretty simple - if you have drilled too far - which is MORE than likely if you used a soldering iron (WOW), then it is like fooked - search here for the POUT fix and try it - if that doesn't work - buy a new PCB
 

Argentum

VIP Member
Dec 13, 2011
388
0
Khobar, Saudi Arabia
I did the POUT fix and a 51 ohm resistor. Its ejecting now