RGH Won't boot to dash when disc in

[Avinitlarge]

Ive either missed something in a tut or this jasper is acting odd. Works fine if you turn the console on when there is no disc in but when there is a disc in it won't boot up or starts to boot but freezes on the Xbox logo screen, does the same if the tray is open

 

[Avinitlarge]

Hmmm, it freezes when I try to play a game too. tried originals and back ups, tried a different drive too

 

[seanr28]

TX cool runner board?

Assuming that you completed the RGH, did you have any bad blocks?

 

[Avinitlarge]

Yep, TX coolrunner, All installed correctly freeboot and all. When the hard drive is connected it wont boot, when there is a USB stick in it won't boot

 

[playingmax]

leave it on for a lil. some times it takes 28+ sec's for it to boot.

 

[Avinitlarge]

I don't think its that what it the problem. It sometimes starts to boot but freezes on the Xbox logo. When there is no disc in, no hard drive connected and no USB drive connected it boot 1st time every time. Once it gets to the dashboard I can put a disc in but the console freezes 9 out of 10 times

 

[SOloNon]

do you compare your nand before write it ?

 

[Avinitlarge]

3 nands, all the same. One thing I have noticed, I have created 3 freeboots and there are 62 differences between them all

1024 block(s) in nand image
62 non-matching block(s) found
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
10
11
12
13
14
15
16
17
18
19
1A
1B
2C
2D
2E
2F
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
40
41
42
43
44
45
46
47
48
49
4A
378
379
37A
37B
37C
37D
382

 

[Martin C]

If you flash the retail NAND back on, is it ok?

If so, try this:

Run your retail NAND through multi_build 0.3. Select Jasper (duh) and select Retail 360 Image.

Let it build you a new clean image.

Then, use this NEW image to build a Glitched image.

 

[Avinitlarge]

Retail, works spot on. Just tried 13599 instead of 13604 and its working spot on at the moment

 

[Martin C]

What are you using to build?

 

[Avinitlarge]

Jtag tool

 

[aclark20]

Jtag tool

Give multibuilder a try. Jtag tool gave me a bit of trouble on my falcon.

 

[Martin C]

Yep, no offence to Coolshrimp, but I've found Multi_builder 0.3 to be flawless.

 

[Avinitlarge]

that seems to have sorted it, cheers