RGH Wont boot xell

[Jackz3885]

TX Product(s) used: J-R Programmer, CR rev c.
Console Type: Trinity
NAND size: 16
Dashboard version: 2.0.16(cant remember rest)
CB version: 9231
Screenshot of NAND details from J-Runner:
Added

Images of close-up soldering to motherboard:
Added

Description of problem:
I have my coolrunner setup fine the green light flashes every 5 sec's or so, i have made my ecc, flashed it. But the console wont boot.

Was the console working before you started: Y

Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
How long is the light on for each time:1 second

 

[Sasuke Uchiha]

were gonna need photos of the install before we can really help

 

[stucknvegas]

Most important thing is your blue cpu_rst wire length and positioning . What are your CR jumper settings
All this would be answered with a complete template

 

[Jackz3885]

Most important thing is your blue cpu_rst wire length and positioning . What are your CR jumper settings
All this would be answered with a complete template

Added pictures i used wire from work as my friend gave me the cr rev c, havent touched the jumpers

 

[ultimate360]

That's your issue, remove the JP component near the switch, and make sure switch is on slim with jumper 2-3 bridged

(a pic of the cool runner typically helps to know if you have it set right)

 

[Jackz3885]

That's your issue, remove the JP component near the switch, and make sure switch is on slim with jumper 2-3 bridged

(a pic of the cool runner typically helps to know if you have it set right)

The switch was on slim, i see that there was already nothing above the Jp text i have also bridged 2 and 3 still not booting.

 

[ultimate360]

use the long slim rst wire and wrap it around the xclamp. That's the best way to boot trinitys

 

[scott1503]

can you upload a picture of your coolrunner and clearer pictures without all the tape

 

[Jackz3885]

Got it fixed, i had scl and sda wrong way round