RGH wont lunch dashbord

[sbhtknkl]

i did a RGH with the coolrunner chip and nandX everything was right the nand was matched
i got to the XeLL-Reloaded and it worked and i photo my cpukey and copied it to a CPUKEY.txt
and did every thing else then i putted the NANDFLASH and the XENON to a usb stick it showed me "SHUT DOWN NOW" i shut it down and removed the power for 2 minutes and taked out the usb
started the consle and a black screen nothing happend i tried it 3 time and same

please help
my dash is 2.0.13604.0
and the nand 16M

 

[Martin C]

What did you use to build the NAND?

Does XeLL still boot with the eject button?

 

[sbhtknkl]

i used 360 multi builder 0.4
after i put the nandflash on the xbox it wont work
but if iput back the ECC it runs the xell

 

[Hackerjac]

try using multibuilder 0.7 to make your image, and search for rawflash 0.4 to use with xell to flash your nand

 

[sbhtknkl]

stil wont work ^^
i really dont know whats the problem

 

[Fisticuffs]

Try putting the Original ECC file you made back on the nand, Then take a copy of your original *nand*, Store it some where safe and make a copy of it and rename it nandflash.bin, Take xenon.elf from Multibuilder!! folder, Not rawflash for some weird reason the rawflash xenon.elf would not work for me, Put nandflash.bin and xenon.elf on a Fat32 formatted usb drive, Boot to xell rewrite the original nand, Then once it boots again, Update to 14699 through the USB download, Then redo your RGH with Multibuilder v0.7, I had a issue like this once using MBv0.4 cause my dash was 13604 and this is how it got resolved, Not saying it will work 100% for you though, See if its boots with this method, Its not going to do harm to your box

 

[sbhtknkl]

it wont lunch the original dash ..
i did what you toled me to do bot it still black screen only the Xell work i pluged of the nandX and got the CR to a progrmer mode

 

[Martin C]

Did you update the console between dumping the NAND and building the RGH image?

Read my LDV sticky.

 

[sbhtknkl]

i didnt update the console it was the same

 

[Martin C]

Since you have the CPU key, don't bother reflashing or recreating the ECC file.

Build your RGH image with Multi_Builder 0.7 and flash the image to your console.

Let me know if it boots with the eject button and if so, try the power button.

My LDV sticky may still be important, so check your LDV too.

 

[Fisticuffs]

it wont lunch the original dash ..
i did what you toled me to do bot it still black screen only the Xell work i pluged of the nandX and got the CR to a progrmer mode

Try putting the CR to NOR mode
Also are you hungry..??, You keep talking about lunch

 

[sbhtknkl]

somthing strange happend i started the console with the enject boton and it opend the xell bot in black not blue what to do now

 

[Hackerjac]

somthing strange happend i started the console with the enject boton and it opend the xell bot in black not blue what to do now

thats not stranges, all mine does that too

 

[sbhtknkl]

I did every thing it still won't get the dash up

 

[blazek566]

Boot to xell se your LDV go to multi builder and create a hacked image than flash it thru xell.:smile:

 

[sbhtknkl]

dont work ^^ i did by the TUT and it still wont get up

can i some how get my old dash and update to the last dash?

 

[Hackerjac]

flash back yourorg nand, make sure it boots, disabel the cr module, update to latest dash

 

[Martin C]

You don't need to update your dashboard at all. You can use ANY dashboard to upgrade to the latest RGH.

 

[sbhtknkl]

yea but nothing working ..
i dont know what to do more if the xell run so the Soldering was good the nand was with no problems
so what can be the problem?

 

[Hackerjac]

and you are completely sure you have written the cpu key corectely in the txt file for multiboilder

---------- Post added at 17:04 ---------- Previous post was at 17:01 ----------

you say you have taken a pic of xell showing your cpu key, please upload that pic and also a screenshot of your cpukey.txt so we can compare, seen before that ppl write wrong