LITEON 74850 Wont update

[EVO91]

First off i'v flashed a lot of xbox's, but this one is a pain in the arse :mad2:

Right i'v just received an xbox with the dashboard version 12625, so I flashed it back to stock "orig-74850C-1a000" then go to update using a USB to 13599 but get error code "3151-351F-1600-2303-C810-1011". Its not stuck in a loop I can still roam around the dash and play originals.

After looking into this harder I'v found that drive is in a 93450C case so I'm wondering could the drive been spoofed to a 74850C or been replaced with a 74850C drive any suggestions?

 

[Lizardpcs]

93450C and 74850C are the same hardware so by the sounds of it the drive may have been flashed with 74850c firmware instead of 93450c.
The only way to know for sure would be to gltich hack and get your cpu key and then find out what drive it had originally from the nand.

Otherwise just flash the drive with 93450c firmware (don't spoof it) and see if it updates.

There is a chance this could ban flag you but there is a chance if it had the wrong firmware on there to start with you could already be ban flagged

 

[EVO91]

Ah I see, so just flash it back to 93450C stock just like I did with the 74850C and see how it goes?

 

[Lizardpcs]

Ah I see, so just flash it back to 93450C stock just like I did with the 74850C and see how it goes?

Worth a try

 

[x360ccm]

just do a dump of the drive after update see what it is.but if it was a 93450C then you should of used that stock fw,maybe next time it's worth takin a few extra seconds to make sure you flashin the right stock.

and when you flash to cfw you wanna load LTPlus-025-v2.0 for the phat liteons.

if you got you fw in jf folder it will auto load it for you......

 

[EVO91]

just do a dump of the drive after update see what it is.but if it was a 93450C then you should of used that stock fw,maybe next time it's worth takin a few extra seconds to make sure you flashin the right stock.

and when you flash to cfw you wanna load LTPlus-025-v2.0 for the phat liteons.

if you got you fw in jf folder it will auto load it for you......

It came up in JF as a 74850C thats why I used that stock firmware.

 

[Lizardpcs]

just do a dump of the drive after update see what it is.but if it was a 93450C then you should of used that stock fw,maybe next time it's worth takin a few extra seconds to make sure you flashin the right stock.

and when you flash to cfw you wanna load LTPlus-025-v2.0 for the phat liteons.

if you got you fw in jf folder it will auto load it for you......

Don't think he can do that dgenx cause it is failing on the update as by the sounds of it the drive has been flashed wrong in the past or replaced in the past