HELP PLZ I have search posts and found no problems exactly like mine. Not sure if I am SOL or not.
First let me say I have an XBOX 1.0. I soldered in the chip socket and the three wire points for th eXecuter3 chip. threw in a 60 GB Hdisk and buttoned it all up. Powered up good and flashed the bios to 1959 no problem. I then installed the Slayer Dash along with some Emulators and misc files no problem as well. I then played a couple of MP3's no problem. I played a MAME game and could not figure out how to end so I powered the box off. When I powered it back up I heard the Slash screen sound but had no display.
Now heres what I have tried so far. I got the same response when trying to boot with the Chip disabled by pressing and holding the power till red. I am able to boot to the Back up Bios by pressing both power and Eject at the same time to power up and I do get the Bios Splash screen. I tried putting back in the original Hdisk and same symtoms. I tried removing the chip from the socket and hooking back up the power button and same symptoms. I put back in the 60 GB drive and the chip, Booted to the Backup Bios screen and Httping intop the box to flash the bios again, it didn't give me the pretty prgress bar this time but did respond with a message and also powerd it self down when done, however this did not seem to do anything. I have not yet checked my Soldering, but will. But like I said even without the chip inserted into the socket I still have the issue. I am new to the XboX Modding world and would appreciate any HELP!!!! I get. Thanks
First let me say I have an XBOX 1.0. I soldered in the chip socket and the three wire points for th eXecuter3 chip. threw in a 60 GB Hdisk and buttoned it all up. Powered up good and flashed the bios to 1959 no problem. I then installed the Slayer Dash along with some Emulators and misc files no problem as well. I then played a couple of MP3's no problem. I played a MAME game and could not figure out how to end so I powered the box off. When I powered it back up I heard the Slash screen sound but had no display.
Now heres what I have tried so far. I got the same response when trying to boot with the Chip disabled by pressing and holding the power till red. I am able to boot to the Back up Bios by pressing both power and Eject at the same time to power up and I do get the Bios Splash screen. I tried putting back in the original Hdisk and same symtoms. I tried removing the chip from the socket and hooking back up the power button and same symptoms. I put back in the 60 GB drive and the chip, Booted to the Backup Bios screen and Httping intop the box to flash the bios again, it didn't give me the pretty prgress bar this time but did respond with a message and also powerd it self down when done, however this did not seem to do anything. I have not yet checked my Soldering, but will. But like I said even without the chip inserted into the socket I still have the issue. I am new to the XboX Modding world and would appreciate any HELP!!!! I get. Thanks