GENERAL Write Verify Failed on xcuter pcb need help

A

amir1974

Full Member
Jan 30, 2011
48
0
swiss
just got my xcuter pcb saved my dummy.bin from liteon 0272 and then fixed the xcuter pcb on drive . tried to flash using X360USB pro and lastet verison of jungleflasher 0.1.87a but write verf. failed

here is jungleflasher log

JungleFlasher 0.1.87 Beta (277)
Session Started Fri Sep 09 22:06:34 2011
This is a 32 bit process running on 4 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 0 Com Ports.
Found 9 windows drives C: D: E: F: G: H: I: J: K:
Found 2 CD/DVD drives F: K:
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
..
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Loading firmware file C:\Users\Amir\Desktop\bol movie\jokessitescript\Dummy.bin
MD5 hash: 630bdff20da90e53f5a4dad81acf2b32
Inquiry string found
Identify string found
Drive key @ 0xA030
B********************
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Auto-Loading firmware file C:\Downloads\Latest.iXtreme.And.Stock.Firmware.And.Jungleflasher.0.1.87.Beta-XPG\JungleFlasher v0.1.87 Beta (277)\firmware\LTPlus-0272-v1.92.bin
MD5 hash: 26c9114d31ff459123fa8af7f50b93e3
Genuine LT plus v1.92
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 1.92
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
 
A

amir1974

Full Member
Jan 30, 2011
48
0
swiss
first thanks for the help . lock even dosnt work. have try flashed again the pcb and lock but it dosnt work. here is new log. even tried wit WP=0 same result ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.87 Beta (277)
Session Started Mon Sep 12 22:03:06 2011
This is a 32 bit process running on 4 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 0 Com Ports.
Found 9 windows drives C: D: E: F: G: H: I: J: K:
Found 2 CD/DVD drives F: K:
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
..
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Loading firmware file C:\Users\Amir\Desktop\JungleFlasher v0.1.87 Beta (277)\Dummy.bin
MD5 hash: 7cd859831822fd130f11d458c0724587
Inquiry string found
Identify string found
Drive key @ 0xA030 ******************************
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Auto-Loading firmware file C:\Users\Amir\Desktop\JungleFlasher v0.1.87 Beta (277)\firmware\LTPlus-0272-v1.92.bin
MD5 hash: 26c9114d31ff459123fa8af7f50b93e3
Genuine LT plus v1.92
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 1.92
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Sending Spi Lock request to Port 0x0000
Lock Failed !
Spi Status: 0x00
 
Last edited:
You must log in or register to reply here.