JUNGLE FLASHER Write Verify Failed!

[N.E.Modz]

hi,
just done my 9540/0272 with no problems but when I come to do a 0225 Winbond drive I come across this problem. "Write Verify Failed"
No matter what I do it wont verify.
here is my log:

JungleFlasher 0.1.86Beta (267)

Session Started Sat Aug 06 15:18:37 2011

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 0 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
 ...........
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
SpiStatus:0x8C....................................................................................................................................................................
Spi Status: 0x00
Manufacturer ID: 0xE
FDevice ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes
Loading firmware file C:\Users\Dale\Documents\Backups\Dummy.David0108.bin
MD5 hash:  577a5d44567bff8186aa6c560b01b590
Inquiry string found
Identify string found
Drive key @ 0xA030 DELETED BY USER
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  SlimKey Extract                
Auto-Loading firmware file C:\Users\Dale\Downloads\JungleFlasher.0.1.86.Beta(267)\
JungleFlasher v0.1.86 Beta (267)\firmware\LTPlus-0225-v1.91.bin
MD5 hash:  5a14a34b933602a94f8375f9ce88f803
Genuine LT plus v1.91
Drive key @ n/a DELETED BY USER
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  LT-Plus 1.91 
                   
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Getting Status from port  0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 4773mS

Write Verify Failed

Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
 Key found in KeyDB at record (20 - Backups)
Key is: DELETED BY USER
Key has been tested and verified, thanks C4eva !

any help would be appreciated

dale:wink:

 

[Antalpromille]

i have the same problem, i did 4 readout in a row and non of them mached. cant get past write verify stage. is my drive broken?

 

[sp4rkst4rt3r]

Seen something about this to do with JF v 0.1.85 when you had to outro a few times....

Try it in the xbox I'm sure it will work if it's written the FW..

 

[tonyintn]

I have seen that message a couple of times when that happens just hit the write again and it will erase and rewrite the file. I have had to sometime do it more then once but it works after the first or second time I hit the write button.

It will finally verify correctly.

Not sure about your setup but I use VMware on my MAC most of the time and it only did that on my MAC, my pc verify every time.

 

[skietuwillie]

I had this when I updated my 02510c (83850v1)to LT+ 1.9 get this error en also when i flashed back to stock and reflashed to LT+1.91...
I used latest JF...
But everything works perfectly..

Grtz skiet

 

[skietuwillie]

I had this when I updated my 02510c (83850v1)to LT+ 1.9 get this error en also when i flashed back to stock and reflashed to LT+1.91...
I used latest JF...
But everything works perfectly..

Grtz skiet

 

[Antalpromille]

In My case writing it again Does not fix The problem, i wrote it maybe 10 Times in a row. I use latest JF and x360usb. As i wrote earlier, every time i read The FW from The flash i get non matching FW. Is there a dosflash compatible with x360usb? My ich7 do not intro The 0225.

 

[anarchy2007]

Same here I have the same isseu with Winbond 0225. It keeps on failing during verification. Result is random "PLAY DVD"errors.

 

[cypher21]

Sorry to disappoint you guys, but that's caused by dremeling a bit too deep or slightly out of position

Only thing to try is relock and reunlock it a few times (with alcohol) and see if it works then.

Banzai'd most likely though, if it gets status 0x3c or 0xBC then it's gone for sure

 

[ajc333]

Sorry to disappoint you guys, but that's caused by dremeling a bit too deep or slightly out of position

Only thing to try is relock and reunlock it a few times (with alcohol) and see if it works then.

Banzai'd most likely though, if it gets status 0x3c or 0xBC then it's gone for sure

Hallo. Sorry for my english. I have one question to you. I have the same problem like in this post. In JF 1,89 at the end of flashing i have a message: Write Verify Failed! I did many times reflash but the same. When I'm using alcohol I have status 0x03 and then I put LT firmware and press write. Always the same error Write Verify Failed! When I put Liteon into the xbox I have a text: Open Tray. I'm using a USB Pro controller. Could You help me?