Writing to the nand, it suddenly slows down.

[kurokaru]

I kinda messed up something with my 360 so I had to reflash the nand to the one I had before (jasper 512mb) so I'm flashing the full nand with the Nand-X using the QSB. Everything has worked fine before but now when im writing to nand it suddenly really really slows down a lot at around 57C. Its taking a while but it seems its gonna take the whole night (and maybe more) to do a full write. Any Ideas of what might be causing this? I'm using jtag tool 3.50 to do the writing.

 

[cholo4390]

i get the same problem about 3 days ago and the problem was my usb cable; i changed it and works without problem since then, i hope this help you

 

[kurokaru]

So I flashed the nand back and now when the 360 turns on, theres no picture and the fans go at full speed. The first time i turned it on, it rrod and the lights that turned on where 2 and 3.

 

[kurokaru]

So I removed the QSBs, did it via wires. Right now I'm past the 57C block and its going at full speed. I accidentaly removed one resistor while removing the QSBs. Am I gonna have problems because of that or does that resistor doesn't matter. Its the one in the red circle next to the red wire.