Wrong Bios

[racerdude404]

I flashed the wrong bios in my x2.6ce (5035 w/137 edition) because my HD is only a 120gb I should have used just the 5035 bios. Any quick fix to this, short of getting a xecuter 2.x Programmer??
The problems I am having is the chip frags when enabled.

RaceBoy404

 

[racerdude404]

Can i softmod it and reflash my chip?

 

[MKChampion]

what happens when you swtich banks?
if both banks are messed then you will to do a hotswap or get a programmer

 

[racerdude404]

both banks are screwed,
i installed the bios to bank1,

but when i swithch it to bank 2, it has the same bios x2 3053

 

[Big_Whoopin]

Flashing a BIOS that doesn't match your existing partitioning (sounds like this is what you think you did...) shouldn't cause a FRAG. If it fails to find any dashboards I assume you would get an error on screen, but you haven't mentioned this occurring. Although I'm not sure what the "137 edition" is that you mention. It sounds like this is the 5035 BIOS already set to one of the non-default LBA48 settings, but I've never seen this on Xbins.

When you boot with the mod on, do you get anything on screen? The flubber, the Xbox logo, etc.?

-Whoopin'

 

[racerdude404]

uhh

lets see
137 edt = for a hdd bigger than 137 gb
when i turn of my chip- every thing works fine
and it frags most of the time
every once in a while it will go to xecture rox my box and stays there

 

[MKChampion]

uhh

lets see
137 edt = for a hdd bigger than 137 gb
when i turn of my chip- every thing works fine
and it frags most of the time
every once in a while it will go to xecture rox my box and stays there

if everything works fine, then why does it frag most of the time?
when it frags do you get any errors on the screen? if so, what number appears?
did you flash a 1mb of X2 5035?