wrong firmware

[cindijanel]

ok, so I flashed my drive with the wrong firmware. so I went back and loaded my dummybin then loaded the LTplus251v3 then spoofed it. went to liteon erase and keep getting a drive return status 0x80 device intro failed. what am I doing wrong?

 

[rick48235]

let us see jf log

 

[ablegepu]

I don't know a lot about it but you may not be getting it in to vendor mode first. Like i said someone else will have a better answer for you probably

 

[scott1503]

Please post a jf log getting into status 0x80 it then changes 0x72 after power cycling the drive

 

[cindijanel]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Sat May 24 01:19:29 2014
This is a Wow 64 process running on 2 x 64 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives E:
Loading firmware file C:\Users\bolen_000\Desktop\jungle\JungleFlasher v0.1.96 Beta (323)\firmware\Dummy.bin
MD5 hash: 0cc34b1c369455ad5e24b3393687edae
Inquiry string found
Identify string found
Drive key @ 0xA030 C5EC19525F0E20F0F6F4C699D96DEF9F
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:\Users\bolen_000\Desktop\jungle\JungleFlasher v0.1.96 Beta (323)\firmware\Latest_iXtreme_and_Stock_Firmware_Pack\Firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!

 

[Antalpromille]

Last time i had a DG-16D2S that always have me status 0x80 sent to me, the issue was that owner had plugged the power-connector the wrong way and burnt a resistor and a power regulator inside.

 

[cindijanel]

so I just unhooked my cables and rehooked them and now I get this

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Sat May 24 02:05:40 2014
This is a Wow 64 process running on 2 x 64 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives E:
Loading firmware file C:\Users\bolen_000\Desktop\jungle\JungleFlasher v0.1.96 Beta (323)\firmware\Latest_iXtreme_and_Stock_Firmware_Pack\Firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Loading firmware file C:\Users\bolen_000\Desktop\jungle\JungleFlasher v0.1.96 Beta (323)\firmware\Dummy.bin
MD5 hash: 0cc34b1c369455ad5e24b3393687edae
Inquiry string found
Identify string found
Drive key @ 0xA030 C5EC19525F0E20F0F6F4C699D96DEF9F
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
....................
Device Intro failed!
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a

 

[GeekHeat]

Once in vendor mode 0x72 then just hit the write button. Assuming u have your dummy.bin and correct firmware loaded up.

 

[briggs01]

i get that every time lately . just click intro/device id click ok then power on/off drive , you should get 0x72 then, then click write

 

[cindijanel]

i get that every time lately . just click intro/device id click ok then power on/off drive , you should get 0x72 then, then click write

I hit intr/device id and I got a "return MRA hack device to normal position then press ok to continue" message