ANSWERED wrong nand and ecc

[silkori]

Hi guys, was messing about and accidently read my jasper nand as falcon(thought i was doing my falcon) in jtag tool. Also wrote ecc back to 360. Is it toast?

 

[playingmax]

just re-read ur nand again under the right setting. then use 360 multi builder to create ur .ecc file.

 

[silkori]

i did re read it again and tried to get the glitch file with jtag tool but i get an error and it won't create the glitch file. Does multi builder do anything different. Also got 250 errors but jtag tool said they both match.

loaded in xnandhealer and it did not show any bad blocks.

 

[playingmax]

not use jtag tool. create ur ecc file w/ multi builder 7. u could use jtag tool to patch the created .ecc file.

 

[silkori]

ok will try playingmax. thanks i'll keep you posted.

 

[Hackerjac]

if the jasper you have is a normal 16 mb it dosen't matter that you read the nand as falcon curse the read command is the same, just make a new ecc using multibuilder and remember to make if for jasper then flash it to your box

 

[silkori]

Ran it through multibuilder and got this

* found flash image, unpacking...
ECC'ed - will unecc.
Found 2BL (build 6750) at 00008000
Found 4BL (build 8453) at 00011a40
Found 15BL (build 65535) at 00017a40
Press any key to continue . . .

---------- Post added at 09:10 ---------- Previous post was at 09:07 ----------

it's a 512.

 

[playingmax]

k, how flash the ecc file.

 

[silkori]

I flashed it in jtag tool but it was for falcon.

 

[gerardo15]

Do not re read the nand because now it has the ecc file on it. Thats not an orig nand.

Just write the first nand dump.

Then re read the nand as 16 , 256 or 512

 

[playingmax]

what do u mean it was for falcon. when u created the ecc file w/ multi builder 7. did you create it under jasper 512?

---------- Post added at 07:28 ---------- Previous post was at 07:26 ----------

this should help
http://team-xecuter.com/forums/showthread.php?t=76193

 

[silkori]

it didn't create an ecc file just gave this error,

* found flash image, unpacking...
ECC'ed - will unecc.
Found 2BL (build 6750) at 00008000
Found 4BL (build 8453) at 00011a40
Found 15BL (build 65535) at 00017a40
Press any key to continue . . .

 

[playingmax]

did you rename ur nand to nanddump n placed it in my 360 folder under multi builder 7?

 

[silkori]

yes sir, I did.

 

[viper0831]

Do not re read the nand because now it has the ecc file on it. Thats not an orig nand.

Just write the first nand dump.

Then re read the nand as 16 , 256 or 512

Follow this first. Write your first read back, make sure it boots. Then in nandpro use: nandpro usb: -r64 nand1.bin