Wrong Section Post

[bigbballer69]

My first post was deleted because it was in the wrong section and even if I did post it in the right section it didn't follow the posting rules.

 

[pyro1001]

updating my jtag

hi guys.
i'm having a problem with updating my jtag. got the xbox off ebay with nand dump on cd and all. and its been running fine.
i got a nand-x through the post the other day and thought i might give it a go. ive seen CarolinaGamer guide http://www.youtube.com/watch?v=xUggR0OQfhs and made things easy to understand.
My problem is i do a dump from nand with coolshrimps jtagtool 1.74 works fine but keep getting error. Error: 250 reading block d1.
got 360 flash dunp tool 0.94 bad blocks id 0x00d1.
and thats the same on all dumps even the ones on the cd.
so i'm worring is it a case of if its not broken dont fix it, or should that be ok to go ahead.
Any feed back would be great. thanks.

 

[pyro1001]

Re: updating my jtag

after doing some reading, found that type of error is just the part of my nand.
now my problem is with jtag tool 1.74. keep getting a error when trying to create .bin. Error: file "data\crl.bin.meta" could not be opened
Error: I/O error
i've got framework 3.5 on my pc. i'm lost at what to try next.

 

[pyro1001]

Re: updating my jtag

right. tried something else.
got a nand dump off a 8955 360. dump came down fine. but no key. but not bothered by that.
I used the nand to try and fix the one i had.
used jtag tools repair bad nand. then ran it through the create .bin.
it went through with no problems this time so must be the bad sector that was giving me proplems.
now how do i know if that should b safe. should what ive done be possable to work?
thanks

 

[pyro1001]

Re: updating my jtag

tried flashing with the nand dump i made. got 2 errors then tried to boot. but nothing. so then reflashed with the xbr nand i had come with it and the red ring is flashing green and red. top 2 red bottom 2 green then swiching each flash. is that now a nice brick or what?