Wrong video mode set - need to change PAL to NTSC (A) in X3

[iommi]

In trying to get a PAL game to work I changed the video mode from NTSC (America) to PAL in X3 Live Config b1959 bios. Now the screen flickers/scrolls and I can't see the menu choices well enough to change it back.

Can someone please post the keypresses (or menu structure) so I can change the video mode from PAL to NTSC (A)?

Thanks in advance,

iommi

 

[iommi]

Re: Wrong video mode set - need to change PAL to NTSC (A) in

Fixed it with SaigonExpress69's post, quoted here:

iommi

---

What you did was reset your video settings from NTSC to Pal I believe...that's why your screen is black and white and rolling...here, try this to fix it. You won't be able to tell what the hell you're doing since your screen is rolling, but hopefully I can help blindly navigate you through X3CL to reconfigure your video settings.

1) Turn on your xbox and make sure you boot to X3CL (Push and hold white button at start up)
2) Push "Down button" 4 times and hit "A button"
3) Push "Down button" 1 time and hit "A button"
4) Push "Down button" 1 time and hit "A button"
5) Reboot and this should hopefully fix your black and white rolling screen.

Note: I'm using the 1957 Gold bios...so I cannot guarantee that my instructions will work for whichever bios you're running. But if you are using the 1957 Gold, then this should at least fix your video settings.

Hope this helps!

_________________
SaigonExpress69

LE Crystal Xbox V1.6
250G Maxtor HDD
Xecuter 3
EvolutionX
GOLD Bios 1957

 

[bcampbell]

Can i install both of these

can i install both of these fans if so can u explain how
http://www.divineo.com/divineo_support/products/zz-360-xcc2r/big_img6.jpg

http://www.xbox-modchips.com/xcm-xbox360-air-cooler.htm

 

[TheMask]

Re: Can i install both of these

you should be able to, I have the Talismoon whisper fans, and the Aurora lights kit both hooked up. The products should have some sort of y splitter that allows for another fan or light strip to be plugged in. Although I'm not 100% sure, all the stuff like this that I've seen, always has a way to keep your fan power supply open.

 

[TheMask]

Re: Can i install both of these

oh yea, do you have the right xbox for the XCM V2 fans, because those are designed for the HDMi case with the extra heat sink, make sure you check before ordering.