JASPER Wrote Xell Reloaded, black screen

[john mathews]

take some pictures of what u fixed and post them/if u in usa I can have this dancing for u 30.00 plus shipping 12.35

 

[adamdabadboy]

did u do what I told u on the cr4 and r-jtag qsb

Yeah I set the cr4xl to 10 ohms and the r-jtag qsb to 330 ohms.

 

[john mathews]

did u solder this point

 

[adamdabadboy]

did u solder this point

Thank you so much, I didn't solder it.
Facepalm

 

[john mathews]

let me know if it boots xell

 

[adamdabadboy]

let me know if it boots xell

Doesn't boot xell, but now Rater had a different response.

The first time after attempting booting:

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...


The second time:

CR4 Selected
Version: 10
Power Up
Waiting for POST to change

Now it keeps ending in Post 7F again. I'm pretty sure some connection is still wrong, gonna go over everything again.

 

[john mathews]

Doesn't boot xell, but now Rater had a different response.

The first time after attempting booting:

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 14 - ..........
Post 04 - BOOT SEQUENCE STARTING
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...


The second time:

CR4 Selected
Version: 10
Power Up
Waiting for POST to change

Now it keeps ending in Post 7F again. I'm pretty sure some connection is still wrong, gonna go over everything again.

is the cr4 blinking

 

[adamdabadboy]

is the cr4 blinking

Nope

 

[john mathews]

its your soldering man post some recent pics of what u just touched up/ it would be a good idea to flash org nand back to make sure console still boots ok(something not solder or making good connection ,because that cr4 should be blinking and u should of been done with this console along time ago) I need to see new pics

 

[adamdabadboy]

its your soldering man post some recent pics of what u just touched up/ it would be a good idea to flash org nand back to make sure console still boots ok

Gonna quickly write nand back to test, will post pics shortly.

 

[adamdabadboy]

Console boots fine with original nand.

 

[john mathews]

Console boots fine with original nand.

k then its time to check the reading of post out with mulimeter

 

[adamdabadboy]

k then its time to check the reading of post out with mulimeter

Which points are the post out?

 

[john mathews]

yellow wire letter c on cr4

 

[adamdabadboy]

yellow wire letter c on cr4

Checked it with multimeter, all good.

 

[john mathews]

post some clear pics please

 

[adamdabadboy]

Was gonna post pics, neighbourhood suddenly has blackout, no electricity. Posting this from my mobile. Got no clue when electricity will be back.

 

[adamdabadboy]

By the way I didn't solder that point down, didn't it say in the tutorial that it's not needed anymore?

 

[adamdabadboy]

ya but I would try it anyway

Electricity is back, gonna upload pics then give the soldering a go.

 

[adamdabadboy]