X logo color on the pro switch.
- Thread starter JohnnyX.1.0
- Start date
personally I think changing it is a bad idea anyway, at least in its current setup everyone knows what the colour codes mean, think if a n00b changed it accidently and their xbox also wasn't working trying to fault find without really knowing what the meaning of the colour of the x3 logo is.
Well you must be REALY stupid if you can't remember 3 different colors!
Like I accidently made purple standard, blue off and red backup!
Whats so different then?
When it won't boot the X3 bios it's all back again so what's the problem? Ok switching the pro leds is actualy a stupid thing to do with the bios but not with the standard switch!
Like I accidently made purple standard, blue off and red backup!
Whats so different then?
When it won't boot the X3 bios it's all back again so what's the problem? Ok switching the pro leds is actualy a stupid thing to do with the bios but not with the standard switch!
Say whats with the trolling there. There is no need for that especially since your simply not seeing the other side of the issue. In this scenario no one is stupid but if someone did change their led colors and your trying to help them trough an issue and asked them what color the logo was you would have no way of knowing they modified the color either intentionaly or by accident, in the case of software control. This makes it harder to support all the units that are out there. So his point is very valid and while I personally would like to be able to change the colors I too think it would be best to leave them as is and change the colors by simply swapping out the LEDs.sjoer said:
maybe you can switch red/blue, but since purple is a combination of both... i think it requires different electronics