X2.6 fOLLY

[onetimeuser22]

So I got an X2.6 and flashed an X3 bios on it.. dumb first time mistake..

Any way other than a hot swap, or reader, to reset the 1 meg to the cromwell bios so I can put on the right 2.6 bios?

 

[crackerjackxxx]

A hot swap or the use of a programer are you only options now

 

[onetimeuser22]

Ok so I found someone to replace the bios on the X2.6, thank god... now im in another situation due to my original error of not backing up the Eeprom.bin..

Background

This XBOX used to be Softmodded with MA, and running EvoX. I wanted to upgrade the HD, so I took off with minimal FAQ research, and unlocked the drive on a PC with XBOXHDM. I did the Drive to Drive copy on it, and now I have two hard drives that are locked (I think by XboxHDM with TEAMEVOLUTION as the master password)...

I now have the X2.6 working in the XBOX, flashed with the latest bios..

Questions:

Can I just reset the drives somehow? I dont care about data loss. How can I get them back to a point that I can use Slayers badass EvoX installer?

Thanks for the help, this is by far the most usefull modding discussion forums I have found.. I just wish I had found it before starting all this..

 

[crackerjackxxx]

so if i get you right the bigger hard drive is locked to your xbox? all you would need to do is fit your large hard drive into your xbox and boot the xbox with Slayers auto installer disc in your dvd drive. Then select full rebuild large hard drive from the options, should see you up and running then.