x2.6CE

[wavag]

I just installed the chip in a 1.6 with the adapter. When I turn on the xbox with the chip off no probs but when I enable the chip it just turns on and off twitch then frags. Maybe bad adapter install, all the ked kight were on?? Thanks for any info.......

Wavag

 

[DJBOOBY]

haveing all the lights on is still dose not mean it 100% install reseat it again

 

[wavag]

Ok I have tried that no go. I then took off the adapter and used the lpc rebuild and solderd the hdd and do and lan. I still get the same results? Am I missing something.. My solder is clean on the lpc board? Thnaks for any info.

Wavag

 

[DJBOOBY]

its still your install check that the chip itself has two blue lights and one red or green light

 

[wavag]

Let me firist say thanks for trying to help me. I only have one blue light right now when the chip in enabled..

Wavag

 

[DJBOOBY]

well it still your install the xapter are a pain in the butt try holding the xapter down while screwind down xapter

 

[wavag]

I got rid of the adapter and solederd the lpc rebuild with the pin header and I get the same results. I am gonig to check my solder on the rebuild really well and see if I missed something...

Wavag

 

[wavag]

I want to say thanks for all your help DJBOOBY. I did figure it out and like you said bad install. I got it to work, flashed... Thanks again your the man...

Wavag

 

[josyc05]

Glad to hear you got it workin Happy modding or whatever!